SPONSORS
2024 ICRBE EXPO |
Reamer Grit
Posted by:
Harry Bell
(---.dhcp.aldl.mi.charter.com)
Date: February 29, 2012 03:11AM
Anybody have a good source for grit I can mix with epoxy to replenish my hand reamers? Harry T. Bell Re: Reamer Grit
Posted by:
Lynn Leary
(---.hsd1.ca.comcast.net)
Date: February 29, 2012 11:35AM
Try here>[www.mudhole.com] Re: Reamer Grit
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 01, 2012 03:55PM
make new reamers or take all that grit off
The grit will come off the reamer and then set into the handle and as you slide it down the blank it will scratch the blank The Tape grit does not come off mudHole has it also Bill - willierods.com Sorry, only registered users may post in this forum.
|