SPONSORS
2024 ICRBE EXPO |
Michigan Rod Builders
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 08, 2011 08:30AM
Wondering how many of us on here are from Michigan and if there is any interest in a get together sometime over the winter. Please leave me a message here or email me. If there is interest I would be happy to put together a meet. ______________________________________ Super Tight Lines......Don Edited 1 time(s). Last edit at 12/08/2011 08:31AM by Don Morse. Re: Michigan Rod Builders
Posted by:
Michael Danek
(50.42.144.---)
Date: December 08, 2011 09:21AM
Might be interested- I just build for family, me, and a few close friends, so am a hobby builder from Laingsburg. Re: Michigan Rod Builders
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 08, 2011 09:29AM
Michael, email me or unhide your email so I can make contact with you if this works out. It is great that you build for friends and such... that's how I started 12 years ago ______________________________________ Super Tight Lines......Don Re: Michigan Rod Builders
Posted by:
JIM MOWL
(---.stat.centurytel.net)
Date: December 08, 2011 02:42PM
I would be very interested. I am in saginaw county not too far from you.
Email: impulsecustomrods@hotmail.com Re: Michigan Rod Builders
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 08, 2011 04:38PM
3 of us so far..thanks guys ______________________________________ Super Tight Lines......Don Re: Michigan Rod Builders
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 08, 2011 05:35PM
Count me in, Don (Unless it conflicts with the High Point EXPO!! I don't let ANYTHING come in the way of that LOL). Been trying to put one together in Mich for years. Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Edited 1 time(s). Last edit at 12/08/2011 05:38PM by Mike Barkley. Re: Michigan Rod Builders
Posted by:
Walt Stock
(---.dtccom.net)
Date: December 08, 2011 05:54PM
Don,
I'm not in Michigan but I grew up in Lapeer - small world. Hope you can put something together. Cheers! Re: Michigan Rod Builders
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 08, 2011 06:40PM
Don't worry Mike I would never do such a thing....maybe next year I will be able to go to the show as well. ______________________________________ Super Tight Lines......Don Re: Michigan Rod Builders
Posted by:
Bill Eshelman
(---.neo.res.rr.com)
Date: December 08, 2011 07:05PM
I could be interested depending on the timing, How far up is Lapeer?
Bill Ohio Rod Builders Canton, Ohio Re: Michigan Rod Builders
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 08, 2011 07:12PM
Its in the flint area... I will compile where everyone is from and try to find the best meeting spot from there. Undecided yet on where to take this first meet, weather we should just get together for a luncheon or have a full blown meeting with raffles and such..... any and all feedback will be greatly appreciated. Please feel free to email me with any questions, comments and suggestions. ______________________________________ Super Tight Lines......Don Re: Michigan Rod Builders
Posted by:
keith corwin
(---.dhcp.bycy.mi.charter.com)
Date: December 08, 2011 07:38PM
I'm in Houghton Lake, used to live in Lapeer. My daughter lives in Davison and I get down often. I was hopeing a Michigan group would get together.The weekends work best for me, unlike Mike, I.m not retired. Looking forward to meeting you.
Keith Houghton Lake Re: Michigan Rod Builders
Posted by:
Bill Eshelman
(---.neo.res.rr.com)
Date: December 08, 2011 07:45PM
I`ll back out, That`s almost 5 hours for me.
It sounds like you are going to have good response for just posting. Good luck. Bill Ohio Rod Builders Canton, Ohio Re: Michigan Rod Builders
Posted by:
Tom Kirkman
(Moderator)
Date: December 08, 2011 08:48PM
I show almost 350 rod builders on the RodMaker Subscriber list in Michigan, so you certainly have a good crowd to draw from.
................. Re: Michigan Rod Builders
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 08, 2011 09:04PM
Tom Kirkman Wrote:
------------------------------------------------------- > I show almost 350 rod builders on the RodMaker > Subscriber list in Michigan, so you certainly have > a good crowd to draw from. > > ................. Wow, thanks Tom ______________________________________ Super Tight Lines......Don Re: Michigan Rod Builders
Posted by:
Randy Kruger
(---.cbpu.com)
Date: December 08, 2011 11:48PM
I am an Amateur Rod Builder from Coldwater, I love to follow the tips and ideas given on the board. Would love to meet fellow builders... Currently working @ GanderMountain, so my schedule is flexible.. Re: Michigan Rod Builders
Posted by:
Joe Vanfossen
(---.neo.res.rr.com)
Date: December 08, 2011 11:59PM
Randy,
You'll enjoy it for sure. Wish I could make it up, but the trip is a bit far for me as well. I hope it's a good gathering and the first of many. Joe Re: Michigan Rod Builders
Posted by:
Tim Collins
(---.hsd1.mi.comcast.net)
Date: December 09, 2011 06:51AM
I'm a few miles south of the Meechigan Big House . . . Re: Michigan Rod Builders
Posted by:
Don Morse
(---.dsl.sfldmi.sbcglobal.net)
Date: December 09, 2011 08:07AM
Randy...shoot me your email or unhide it here so I can keep in contact with ya. Looks like this may turn into a big shindig. ______________________________________ Super Tight Lines......Don Re: Michigan Rod Builders
Posted by:
dennis adamczyk
(---.hsd1.mi.comcast.net)
Date: December 09, 2011 08:40AM Re: Michigan Rod Builders
Posted by:
Tony Childs
(152.72.151.---)
Date: December 09, 2011 11:10AM
Keep us posted. I may be able to make it, located in Saginaw.
Eyefull Custom Rods Sorry, only registered users may post in this forum.
|