I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Vibronic Rods
Posted by: Ray Mazza (---.syrcny.east.verizon.net)
Date: June 20, 2011 09:47AM

In my post last week, I said I'm making some casting bubble rods with graphite TN handles. Over the weekend I was flipping through my collection of RodMaker Magazines and re-read the Vibronic Rod article. Seems like a good idea for the bubble rods. The article didn't go into detail as to how the handle is attached to the blank on the spinning rod, or what material is used to cap the ends. I have a couple of ideas, but thought I'd see what others have tried before I build. Thanks for sharing.

Ray Mazza
Midstream Rods
Utica, NY

Options: ReplyQuote
Re: Vibronic Rods
Posted by: Robert A. Guist (---.nmci.navy.mil)
Date: June 20, 2011 02:43PM

Hello Ray.

Talk to Steve Gardner it's his "Thing".(super light stuff).

Bob,

New Bern, NC.

Options: ReplyQuote
Re: Vibronic Rods
Posted by: Phil Ewanicki (---.135.188.72.cfl.res.rr.com)
Date: June 22, 2011 09:29AM

By any chance are these rods manufactured at the Gizmonic Institute?

Options: ReplyQuote
Re: Vibronic Rods
Posted by: Ray Mazza (---.syrcny.east.verizon.net)
Date: June 23, 2011 06:55PM

Sent him an email. Hoping to hear back.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster