SPONSORS
2024 ICRBE EXPO |
cork grip preserve
Posted by:
Bill Cohen
(---.dhcp.embarqhsd.net)
Date: April 19, 2011 12:31PM
I have never put a cork preserve or protector on my grips. I am considering it now What is your opinion and please name some good products that you have used thanks Re: cork grip preserve
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 19, 2011 12:37PM
I don't use it, but if you do, U-40 has an excellent reputation.
Roger Re: cork grip preserve
Posted by:
Eric Viburs
(---.mw.usar.army.mil)
Date: April 19, 2011 03:55PM
The only time I do is with burl or composit cork, then when I do it is either spar or true oil. Re: cork grip preserve
Posted by:
Bob Riggins
(---.se.biz.rr.com)
Date: April 19, 2011 05:10PM
I use Birchwood Casey Tru Oil when I mix burl into the grips. It is a protectant, but it also makes the burl really pop (visually). Re: cork grip preserve
Posted by:
Steve Bro
(---.automatededm.com)
Date: April 19, 2011 05:35PM
I use U-40 on my burl cork handles and it really pulls the grain in the cork out. Steve Bro (BroCo Custom Rods) Re: cork grip preserve
Posted by:
Walt Natzke
(170.146.227.---)
Date: April 19, 2011 06:35PM
I use U-40 as well, but modify the application procedure a bit.
The instructions indicate that a second coat has no effect, but I find that it does. I sand the grip down to 320 wet/dry and then apply a generous coat of Cork Sealer. I sand again with 320 and apply a second coat, and then, when dry, do another VERY light sanding with 320 to create a bit of "nap". This seals the cork very well but provides a little bit better "gription" for the hand. Walt Natzke Ripon, CA Re: cork grip preserve
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: April 19, 2011 07:23PM
I mostly use Tru-Oil (gunstock finish) makes the cork really pop besides protection (I use pretty much only burl corks)
u-40 sealer also does an excellent job Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Edited 1 time(s). Last edit at 04/19/2011 10:13PM by Mike Barkley. Re: cork grip preserve
Posted by:
Mike Bradford
(---.war.clearwire-wmx.net)
Date: April 19, 2011 09:47PM
I used Johnson's paste wax for years, and then switched to the U-40 sealer. The U-40 seems to go deeper into the cork. I still do 2 coats of the paste wax after the U-40 dries. It gives some depth to the shine. Mike Bradfrod R.M.B. Fishing Rods Nampa, Idaho Re: cork grip preserve
Posted by:
Chuck Mills
(---.grenergy.com)
Date: April 20, 2011 01:22PM
I use U-40 on cork, and wax on the blank. ;) _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: cork grip preserve
Posted by:
Jon Gold
(---.dsl.pltn13.sbcglobal.net)
Date: April 20, 2011 03:46PM
I sand down to 320 grit. Then I wipe the cork dust off.
Then one coat of U40. Let it dry. Then I put on a coat of (don't laugh) chap stick. After a day or so I wipe off the excess chap stick with a paper towel. Jon Re: cork grip preserve
Posted by:
Todd Badgley
(---.sub-75-202-224.myvzw.com)
Date: April 20, 2011 04:43PM
Instead of Tru Oil Gun finish, I have started using Icy-Hot. Two thin coats then I buff to a high gloss finish. Just recently I have been sanding down with 220 then 320 then 600. A quick splash of Brut, to keep that fishy smell away, and now I'm ready for grip decals. Simple as that, no fuss - no worry. Anyone ever try Vitalis?? Dad used it everyday! Re: cork grip preserve
Posted by:
Walt Natzke
(170.146.227.---)
Date: April 20, 2011 05:11PM
LOL. I suppose the Icy-Hot provides relief to those aching hands when the fishing is hot! Walt Natzke Ripon, CA Re: cork grip preserve
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 20, 2011 05:16PM
I have used and like the yellowing look of cork when I thin finish to a watery state and put - after cleaning the cork WELL - on with a paper towel The thin state helps to soak in more and just one coat still gives it a nice color seals and nice feel. Bill - willierods.com Re: cork grip preserve
Posted by:
Chuck Mills
(---.grenergy.com)
Date: April 21, 2011 12:08PM
I'm sorry...could you repeat the question? ;) _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: cork grip preserve
Posted by:
Ed Casteel
(---.mycingular.net)
Date: April 22, 2011 10:10PM
If you like an antique look meaning darkened and yellow tung oil works well and is easy to freshen up and repair. Try it first on a scrap to make sure you like the color change. I like it more on lessor cork grades than on clearer grades such as flor grade. Btw on lessor grades I don't use filler, I prefer a natural look. Being a woodworker I hate wood putty on anything unless it is to be painted over. Sorry, only registered users may post in this forum.
|