SPONSORS
2024 ICRBE EXPO |
hypalon - black
Posted by:
Ron Beagles
(---.lightspeed.tblltx.sbcglobal.net)
Date: January 01, 2011 01:34PM
I am looking for a source to buy black hypalon grips - first need is id of 1 1/8th - surf rod blank is toooo! big for the 3/4 and 1" id grips I all ready have - none of that stuff is really available in H - town anymore that I know of -
BTW - Happy New Year everybody Re: hypalon - black
Posted by:
J.B. Hunt
(---.ppoe.dsl.logantele.com)
Date: January 01, 2011 01:42PM
You can easily slide on a 1" ID Hypalon grip onto a blank measuring 1 1/8 inch OD when using Rod Bond as the adhesive. It will also serve as a lubricant. J.B.Hunt Bowling Green, KY Re: hypalon - black
Posted by:
John Repaci
(---.ri.ri.cox.net)
Date: January 01, 2011 03:10PM
@#$%& always had a good supply of Hypalon.
By the way, no longer a sponsor, what happened? "It ain't what you don't know that gets you into trouble.It's what you know for sure that just ain't so." Mark Twain John in Wethersfield, CT Re: hypalon - black
Posted by:
J.B. Hunt
(---.ppoe.dsl.logantele.com)
Date: January 01, 2011 03:20PM
Well, there went one of our best Sponsors !
I have been having trouble getting on their website lately. As Tom has stated many times, the profit margin on rod building products is very low. J.B.Hunt Bowling Green, KY Re: hypalon - black
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: January 01, 2011 03:33PM
Acid Rod is still in business and I was just now on their web site. Sorry to see them no longer a sponsor. Re: hypalon - black
Posted by:
Mud Hole Custom Tackle
(---.cfl.res.rr.com)
Date: January 01, 2011 03:54PM
Hypalon Grips- all the shapes, sizes and colors currently commercially available are online at:
[www.mudhole.com] We also offer Raw (bulk) Hypalon material to shape our own grips - please call us toll free to order at the number below. Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: hypalon - black
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: January 01, 2011 11:02PM
Trick when sliding the grip into position is not to stop until you are where you want it to be. Do it quickly in one motion and the 1 inch will work fine. Add some epoxy above the point on the rod where the grip starts to bind. Spin the grip to insure that the inside is fully coated with epoxy. Coat the rest of the blank lightly(most will be squeegeed off ) and drive it home. If you need to leave room for a butt cap put a piece of tape at the point you need to stop. Freddwhy (Rapt-Ryte) Sorry, only registered users may post in this forum.
|