SPONSORS
2024 ICRBE EXPO |
Metallic thread question
Posted by:
kevin gross
(---.static.izoom.net)
Date: December 22, 2010 04:24PM
Can i use straight metalic thread to do a guide wrap? I saw a color combo i love and would like to do it on one of my rods. Kevin Gross Many men will spend their whole life wondering if they made a difference. Marines dont have that problem - Ronald Regan Re: Metallic thread question
Posted by:
Michael Sledden
(---.176.42.254.ptr.us.xo.net)
Date: December 22, 2010 04:25PM
Not a problem. Re: Metallic thread question
Posted by:
Jim Gamble
(97.106.17.---)
Date: December 22, 2010 05:14PM
Mike is correct. Metallic is a tad tricker to work with (tension, handling, etc.), however it makes for a durable, good looking wrap. Re: Metallic thread question
Posted by:
Bill Eshelman
(---.skylan.net)
Date: December 23, 2010 10:02AM
I use metallics as a guide wrap alot with no problems so far.
Bill Ohio Rod Builders Canton, Ohio Re: Metallic thread question
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: December 23, 2010 11:39AM
One thing to remember when wrapping guides with metallic is to use a tension device that uses the spool, not the type that runs the thread between two discs. That will tend to unwrap the foil from the thread. Freddwhy (Rapt-Ryte) Re: Metallic thread question
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: December 23, 2010 11:39AM
One thing to remember when wrapping guides with metallic is to use a tension device that uses the spool, not the type that runs the thread between two discs. That will tend to unwrap the foil from the thread. Freddwhy (Rapt-Ryte) Re: Metallic thread question
Posted by:
Hunter Armstrong
(---.rcmdva.east.verizon.net)
Date: December 27, 2010 03:24PM
Another issue I've seen mentioned concerns the use of a color preserver. When using metallic threads, I do not use one. The only time I tried using a preserver on metallic thread, it dulled the effect of the thread. Or, at least, it appeared so to me. I have read where others agreed with me, and of some that disagreed. At any rate, I do not use color preserver with metallic thread and haven't noticed any ill effects for doing so.
Slainte, Hunter From ghoulies and ghosties, and long leggedy beasties, and things that go bump in the night, Good Lord deliver us! Sorry, only registered users may post in this forum.
|