SPONSORS
2024 ICRBE EXPO |
top coat over fusions
Posted by:
Mark Clooten
(---.)
Date: December 22, 2010 09:24PM
if you painted a rod blank with kyrlon fusions paint would you have to go over it with a clear coat?? Or does kyrlon make a clear coat fusions? I wouldnt beat the rod around but wonder if the paint by itself would be tough enough to hold up pretty well for a while. Re: top coat over fusions
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 22, 2010 09:57PM
They do make clears. Check there web site. Bill - willierods.com Re: top coat over fusions
Posted by:
Isaiah Bumagat
(---.hsd1.or.comcast.net)
Date: December 23, 2010 01:28AM
They actaully make a Fusion Clear. Re: top coat over fusions
Posted by:
Bill Laminack
(173.22.70.---)
Date: December 23, 2010 09:20PM
How well has the Fusion paint worked for you in this application? I tried it once and ended up having to take it off and sand it down and just coat the blank with epoxy. Re: top coat over fusions
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 24, 2010 09:38AM
I have put permagloss over DupliColor with no problems but have not tried it on Krylon paints
Try on a scrap piece first and see. Bill - willierods.com Sorry, only registered users may post in this forum.
|