SPONSORS
2024 ICRBE EXPO |
madeira thread
Posted by:
Jerry Haight
(---.sub-75-219-177.myvzw.com)
Date: December 01, 2010 04:00PM
just bought some am tackle acrylic color preserver and ran a test on a couple guides wrapped with a couple different colors of madeira thread and all went well with no fish eyes etc. Now its time to try on a ice fishing rod im about to build and hope all goes well. This acrylic cp is the first kind that has worked for me with the madeira thread. Re: madeira thread
Posted by:
Jim Meallows
(---.dhcp.oxfr.ma.charter.com)
Date: December 01, 2010 05:06PM
What would happen before? Re: madeira thread
Posted by:
John Pierce
(---.hsd1.ar.comcast.net)
Date: December 01, 2010 05:21PM
I tested the Flex Coat CP over the weekend and it worked well, no fisheyes. Used 3 coats tho. Re: madeira thread
Posted by:
Jerry Haight
(---.sub-72-110-158.myvzw.com)
Date: December 01, 2010 05:35PM
i would get fish eyes and the epoxy wouldnt spread out smooth. i was told that it is because of the silicone in the madeira thread Re: madeira thread
Posted by:
wayne diduch
(---.cpe.net.cable.rogers.com)
Date: December 01, 2010 05:53PM
Wayne... if you don't mind me asking, who's Colour preserver do you use on Maderia??? Thanks Wayne Re: madeira thread
Posted by:
Jerry Haight
(---.sub-72-110-158.myvzw.com)
Date: December 01, 2010 08:12PM
american tackle acrylic color preserver Re: madeira thread
Posted by:
Paul Lindsey
(---.dsl.okcyok.swbell.net)
Date: December 01, 2010 10:02PM Sorry, only registered users may post in this forum.
|