SPONSORS
2024 ICRBE EXPO |
Ultra light 9 footer
Posted by:
Darek Idus
(77.236.26.---)
Date: November 26, 2010 02:37PM
Hi All,
A dilemma from Poland. I need an ultralight trout spinning rod to the specification below: Lure: 1/64-1/32 oz, Line: braid 4-6 lbs, Length: 9-10 feet, Action: medium Casting distance: max. 20 feet Number of rod pieces: 4 pcs preferred Method: micro jigging in small creeks where trout up to 4 pounds can be caught. No much space for drag fighting. Difficult landing conditions – elevated, steem and bushy banks. Overhead casting very rare. My first thought was to go for a graphite fly blank 4-5 wt but I’m affraid it is not sufficiently powerful in its butt section. An option would be a fiberglass fly blank but a 9 footer made from glass will be too slow and heavy. Powerful and ultralight, long and sensitive- is it a mission impossible? Sorry for my poor English and thanks for any suggestions as for the blank, handle, guides etc. Re: Ultra light 9 footer
Posted by:
Terry Kirk
(---.ks.ks.cox.net)
Date: November 26, 2010 03:57PM
Check out the Batson line up. They will have a blank to fit the need. Re: Ultra light 9 footer
Posted by:
Ron Schneider
(---.mid.suddenlink.net)
Date: November 26, 2010 05:15PM
I suggest the Batson RX7 Steelhead blanks IST1081-F
4-8 Lb line, light tip, good backbone. Here is a link; [www.schneidersrods.com] Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: Ultra light 9 footer
Posted by:
Don Baker
(---.dhcp.embarqhsd.net)
Date: November 26, 2010 08:30PM
I have used 4 and 5 wt fly rod blanks built as spinning and casting rods for 20+ years to white bass fish.I rarely catch a 4lb fish, but occasionally have caught catfish , walleye ond other species that go 10 lb+. In fairly upen water they handle these fish easily. The brush in your streams could make it questionable with the fly blanks in this range but they have a lot more power than one would think. I wouldn't be afraid to try a 5wt or even a 4. They make great spinning rods. My favorite is an old St Croix SCIV, 9'- 4wt. Good Luck Re: Ultra light 9 footer
Posted by:
Darek Idus
(77.236.26.---)
Date: November 27, 2010 04:40AM
Thanks to all.
Did anybody fished the Phenix ultralight rods? [www.mudhole.com] The one perfectly matching what i need is FX902-2-B. Is is a good choice? Thanks Re: Ultra light 9 footer
Posted by:
Eugene Moore
(---.245.75.162.Dial1.StLouis1.Level3.net)
Date: November 27, 2010 10:34PM
Darek,
Based on the fishing conditions you described I would probably target a 6 or 7 weight IM6 graphite or fiberglass blank. Contact with surrounding vegetation should be expected in such tight quarters. The stiffer blank should take more punishment without being overly heavy. The extra strength will help in extracting the fish from cover. Will not be a good casting instrument, but you're not looking for long casts. Generally for ultralight I would look for a 4 or 5 weight but not under your conditions, just too long and fragile. Even the hookset may become ensnared jeopardizing the rod tip to an average fish. Durabilty should be veiwed as a high priority. Good luck, Eugene Moore Re: Ultra light 9 footer
Posted by:
Darek Idus
(77.236.26.---)
Date: November 28, 2010 05:34AM
Hi Eugene,
That's exactly what I consider. I'd be happy to make this rod on a fiberglass blank but can't find any 9' long. Can you target one please. Thanks all for your support. Re: Ultra light 9 footer
Posted by:
Eugene Moore
(---.244.209.236.Dial1.StLouis1.Level3.net)
Date: November 28, 2010 11:28AM
Darek,
You might try the Forecast F906-4 for an IM6 4-piece blank. I've been told they use a fiberglass scrim for increased durability. Sorry can't find anything in my catalogs for a fiberglass choice. You might try the @#$%& sites for an older glass blank or contact Lamiglas or Seeker to see if such a rod is still available. Also check out this thread toward the bottom of the page [rodbuilding.org] Eugene Moore Edited 1 time(s). Last edit at 11/28/2010 11:31AM by Eugene Moore. Sorry, only registered users may post in this forum.
|