I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Dimension for Adjustable rod support clamp
Posted by: Bill Giokas (---.bos-dynamic.gis.net)
Date: November 08, 2010 06:16AM

Can someone give me the dimensions for the lower clamp on the adjustable rod support clamp that is used on the Pac Bay /American Tackle wrappers? It looks like form the photo that the lower clamp is removable. Thanks Bill

Options: ReplyQuote
Re: Dimension for Adjustable rod support clamp
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: November 08, 2010 08:47AM

Bill,
Use a tape measure and straight edge to determine the necessary dimensions.

Good luck
Roger

Options: ReplyQuote
Re: Dimension for Adjustable rod support clamp
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: November 08, 2010 08:47AM

Bill,
Remember, if you are talking about the lower rod support clamp, you need to have a range of adjustment in the clamp to allow for the use of various blanks - if this is the support clamp of which you are speaking.

Roger

Options: ReplyQuote
Re: Dimension for Adjustable rod support clamp
Posted by: wayne diduch (---.cpe.net.cable.rogers.com)
Date: November 08, 2010 05:32PM

Bill, the Lower Clamp [ Vertical ] support is 1/16'' Flat Bar 3 3/16" High, 1 3/8" Wide. the slot in the bracket is 1/4" Wide and 1" High [ vertical travel of slot ] . The end of the 1/4" x 1 " slot starts at 11/16"of an inch from the Bottom of the vertical Bar. Hope this makes sense Cheers....Wayne

Options: ReplyQuote
Re: Dimension for Adjustable rod support clamp
Posted by: Bill Giokas (---.bos-dynamic.gis.net)
Date: November 09, 2010 05:11AM

Thanks Wayne. I might uses these brackets on my Grizzly Hobby lathe. Bill

Options: ReplyQuote
Re: Dimension for Adjustable rod support clamp
Posted by: wayne diduch (---.cpe.net.cable.rogers.com)
Date: November 09, 2010 04:05PM

Bill, my pleasure, glad i could help!! Wayne

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster