SPONSORS
2024 ICRBE EXPO |
Fuji Silicon carbide insert tip
Posted by:
Ron Beagles
(---.lightspeed.tblltx.sbcglobal.net)
Date: October 30, 2010 07:59PM
Ok where can I get a size #22 for this surf rod I am building, need it quick Re: Fuji Silicon carbide insert tip
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: November 01, 2010 12:33AM
Explain insert tip. The average supply shop does not carry insert replacements Good Wraps Bob Re: Fuji Silicon carbide insert tip
Posted by:
Tom Kirkman
(Moderator)
Date: November 01, 2010 10:11AM
It may be hard to do as not many surf rods these days have tip diameters that large. Not much to choose from in tiptops with a 22/64 tube diameter.
If you take RodMaker, you probably saw the method for using a double legged casting guide as a tiptop on larger diameter surf rod tips. All it takes is a little bending and you'll have one of the sturdiest tiptops possible. And it looks good, too. ............ Sorry, only registered users may post in this forum.
|