SPONSORS
2024 ICRBE EXPO |
Help choosing new printer for white decal media
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: September 29, 2010 12:19PM
I have been using the Papilio white decal media for ink jets. My old HP printer had a setting for Glossy Photo Paper, and would print a really dark black. It broke, and I picked up a new HP, and it does not have a print setting of Glossy Photo Paper (recomeneded for the decal media). The closest I can get is the HP Premium Plus Photo Paper setting the printer has - but it's no where near the black I used to get.
Looking for a better printer for this stuff, and wondering what you guys use? Also - is there a white decal media from Papilio that can be used with laser printers? Thanks, Marc Re: Help choosing new printer for white decal media
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: September 29, 2010 12:33PM
I ran into the same problem you describe. My old HP worked great for decals and after it died I got a new HP. The depth of the black wasn't nearly as good as the old printer, even after adjusting the saturation settings. I returned it and got an Epson Artison 710 All-in-One printer. It works great and I'm very happy with it. Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: Help choosing new printer for white decal media
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: September 29, 2010 01:03PM
You will also find selections in the Photo Shop or Corel software to select specific shades of all colors including black -
Did you look carefully in the Properties in the Print Menu? Usually you can select a ink lay down percentage as swell. I have not seen an Hp Inkjet that will lock you into a black selection which limits your selection of color. Yes Papillio does have laser paper - really good stuff if you have access to a laser printer. Re: Help choosing new printer for white decal media
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: September 29, 2010 01:30PM
Hey Bill - I have a laser sitting next to my ink jet. Which media would you suggest?
Thanks, Marc Re: Help choosing new printer for white decal media
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: September 29, 2010 02:30PM
I would always choose a laser over an inkjet if the correct media is used.
I will send you one of my files that uses a black background done with Corel - print it and see if the blank is properly recognized by your printer. I suspect you have a software issue and are not limited by the black ink in the printer. Re: Help choosing new printer for white decal media
Posted by:
mitchell read
(---.jetstream.xtra.co.nz)
Date: September 29, 2010 02:34PM
mean u guys do ur own stickers???? do u buy a special papper witch is sticky and clear might have to look into this Re: Help choosing new printer for white decal media
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: September 29, 2010 02:36PM
Mitchell: Start here: Click on: [www.swamplandtackle.com]
Mark check your email sent some test samples. Edited 1 time(s). Last edit at 09/29/2010 02:38PM by Bill Stevens. Re: Help choosing new printer for white decal media
Posted by:
mitchell read
(---.jetstream.xtra.co.nz)
Date: September 29, 2010 02:40PM
sorry to crash ur guys thread what papper do u use and what software im gona go hunt a printer down today it will make life so much easyer Re: Help choosing new printer for white decal media
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: September 29, 2010 02:48PM
You can get the ink jet print media from Swampland. I use Corel Paint Shop Pro - I'm pretty computer challenged, and it wasn't hard to figure out.
Bill - does Swampland have the laser print media? Thanks, Marc Re: Help choosing new printer for white decal media
Posted by:
Chuck Mills
(---.static.stcd.mn.charter.com)
Date: September 29, 2010 04:38PM
Bill - I am having the same issue with a new HP all in one. Please send your file.
Thanks! _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Help choosing new printer for white decal media
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: September 30, 2010 10:25AM
I have an HP Office Jet J5780 All-in-one. I use Microsoft Office which has a variety of fonts and an option for bold print. With the variety of fonts and bold print I've had no issues with text. Re: Help choosing new printer for white decal media
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: September 30, 2010 10:29AM
Marc please give us a heads up on what you have done to locate your problem - what are the results - I suspect it will help a lot and clear up this "ink" issue. Re: Help choosing new printer for white decal media
Posted by:
Chuck Mills
(---.sta.embarqhsd.net)
Date: September 30, 2010 11:33AM
I'm using Corel Draw 9. You can buy older versions of it cheap. _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Help choosing new printer for white decal media
Posted by:
rick sodke
(---.pmc-sierra.bc.ca)
Date: September 30, 2010 01:43PM
Try Gimp - it is very powerful and open source (read FREE).
[www.gimp.org] Sorry, only registered users may post in this forum.
|