Hello Every one:

I'm working on a spiral wrap rod for a friend, I am doing underwraps on all the guides with Gudebrod Nylon thread. My question is will applying a coat of CP be enough before I wrap the guides or should I add the CP, then apply a thin coat of epoxy before putting the guides on ???


Thanks for your help as always.
Fernando Torres-NERB in the making

It wil be enough. However, a thin layer of epoxy won't hurt at all unless this a lighter type rod.

.............

Hi Tom:


Thanks for the info, this will be a heavy actiion boat road used up East here in the New York area. So just to be on the safe side. I will heed the advice and apply a small amount just in case.



As always appreciate the help.

Fernando Torres

I always add a thin layer of epoxy. Just my preferred method.
Sam

I also always apply a coat of exoxy to all my underwraps.
Ron

Ron Weber

Why do the folks that do apply epoxy to the underwraps - apply it?

Roger

So it has a coat of some thing to give a better surface to wrap on. I also use Permagloss . harder surface.

Bill - willierods.com