SPONSORS
2024 ICRBE EXPO |
Rod Builkding Logos help
Posted by:
Anonymous User
(---.midd.adsl.virginmedia.com)
Date: July 20, 2010 04:51PM
Can anyone help?
I'd like to buy a couple of Rod building logos, but can't seem to organise the return postage from over here in the UK. OK, it's a cheek I know, but can someone get me a couple and send them over to the UK and I'll get the postage sent over to you straight away? Thanks for any help. Phil. Re: Rod Builkding Logos help
Posted by:
Tom Kirkman
(Moderator)
Date: July 20, 2010 04:57PM
All you have to do is send an envelope with a 5x7 envelope with enough postage to to get it back to you. A couple decals will only weigh .25 ounces. Add that to the weight of your return envelope and ask your Post what the correct amount would be.
Don't worry if you put a little too much on the return envelope - it won't go too far. It will stop when it reaches you. ............... Re: Rod Builkding Logos help
Posted by:
Grant Darby
(---.wavecable.com)
Date: July 20, 2010 05:25PM
Now that, Tom, was funny! Re: Rod Builkding Logos help
Posted by:
Jim Gamble
(97.106.17.---)
Date: July 20, 2010 08:02PM
Phillip -
Is the problem obtaining US postage stamps for the return journey?? Jim - Re: Rod Builkding Logos help
Posted by:
Charlie Armontrout
(---.dmt.ntelos.net)
Date: July 20, 2010 10:05PM
Philip,
Whoever you wish to buy your decals from would certainly see that they got back to you or otherwise the business would not last very long. Send an e-mail to the business selling the decals like you did to this board, describe to them what you want and then they will be responsible to get the proper postage on the package to get them back to you. Getting the return postage for the return package is not your responsibility, you may have to pay for it as part of the order, but you don't need to send the stamps to them . . .hopefully they have enough business saavy to get the stamps!! Good luck and keep 'em turnin' Charlie Re: Rod Builkding Logos help
Posted by:
Tom Kirkman
(Moderator)
Date: July 20, 2010 10:17PM
I think he's talking about the International Custom Rod Building Symbol. His local Post should be able to get him what he needs.
............. Re: Rod Builkding Logos help
Posted by:
Anonymous User
(---.midd.adsl.virginmedia.com)
Date: July 21, 2010 02:21PM
Hi Guys, yes it's the International Custom Rod Building Symbol I'm after.
The problem I have Tom, is getting the US stamps for my pre-paid envelope hence my post that someone can help me. I'd be delighted to put as much postage on and more if I could, but over here I can't buy US postage stamps. (can you guys buy English stamps?). I can easily send over the correct size envelopes with my return address on one of them. I'm hoping to send over a return envelope for someone to get it stamped up for return to me and I will get the cost straight back via PayPa or any other means possible. Cheers, Phil. Re: Rod Builkding Logos help
Posted by:
John Repaci
(---.ri.ri.cox.net)
Date: July 21, 2010 03:11PM
Phil,
Check your email "It ain't what you don't know that gets you into trouble.It's what you know for sure that just ain't so." Mark Twain John in Wethersfield, CT Re: Rod Builkding Logos help
Posted by:
Anonymous User
(---.midd.adsl.virginmedia.com)
Date: July 21, 2010 03:48PM
Thanks John for your kind offer of help, I've replied in person to you.
Regards, Phil. Re: Rod Builkding Logos help
Posted by:
Charlie Armontrout
(---.dmt.ntelos.net)
Date: July 22, 2010 12:33AM
Thanks Tom,
Someday you have to tell me how you use that mental telepathy technique - If I had seen the words "International Custom Rod Building Symbol" logo I would have immediately known what the gentleman was wanting. Maybe it was the large expanse of water between us and him that I was not calibrated for. Just a case of him thinking one thing and me thinking another. "Tis best be thought a fool than to open one's mouth and remove all doubt" Charlie Re: Rod Builkding Logos help
Posted by:
Tom Kirkman
(Moderator)
Date: July 22, 2010 08:08AM
No telepathy, just a guess. I could easily have been wrong.
.............. Sorry, only registered users may post in this forum.
|