SPONSORS
2024 ICRBE EXPO |
Identity of Guide
Posted by:
Greg Marshall
(96.19.80.---)
Date: July 14, 2010 08:47PM
Photo links below show some guides I ripped off of an old spinning rod brought to me. Some were missing their ring. I'd like to replace em all with the same thing. Does anyone know what style (GLV...,LCT..., etc.) these guides are and where can I find em? I know they are Fuji double foot spinning rod guides and the sizes are stamped into the base of the foot, as is "Fuji". But, I can't find em anywhere on the net. All Fuji guide frames this size seem to be made of some type of round material. These are obviously flat and the ring frames seem welded to the base frame.
thanks guys. [www.rodbuilding.org] [www.rodbuilding.org] [www.rodbuilding.org] Re: Identity of Guide
Posted by:
Jim Gamble
(97.106.17.---)
Date: July 14, 2010 09:04PM
I don't remember the nomenclature, but I have TONS of them. IF you want to send really clear photos AND sizes, I could probably hook you up. Re: Identity of Guide
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: July 15, 2010 11:33AM
Greg,
These are heavy saltwater boat guides. If you have more than one or two off of the rod, it probably makes sense to strip off the rest of the guides and simply pick up a new set of comparable guides. Take care Roger Re: Identity of Guide
Posted by:
BobMcKamey
(---.se.biz.rr.com)
Date: July 15, 2010 02:21PM
Greg -- Those guides have not been around in many, many years from Fuji. If you want a substitute that is very similar, the Pacific Bay Hialoy model BSHG is about as close as it comes. Bob McKamey bobm@mudhole.com Re: Identity of Guide
Posted by:
Greg Marshall
(96.19.80.---)
Date: July 15, 2010 04:55PM
Thats it! I'll go with the Pac Bay's BSHG. Thanks guys. Sorry, only registered users may post in this forum.
|