SPONSORS
2024 ICRBE EXPO |
Fuji Reel Seat
Posted by:
Paul Majewski
(203.62.236.---)
Date: June 29, 2010 09:02PM
Hello
I am in the process of gathering components to build up a spin rod using the United Composites-USA Graphite USA Series UC-704 blank. Along the way I decided I wanted a reel seat that differs from the norm for this rod. While searching the net, I came across a picture of Fuji's DNPSC seat in the Cobra Graphite Finish. However, after making a few enquiries, I have discovered that this seat is no longer available. Is anyone aware of someone that may have some old stock of the DNPSC18 laying around? Any help with tracking one down would be greatly appreciated. Re: Fuji Reel Seat
Posted by:
Tom Kirkman
(Moderator)
Date: June 29, 2010 09:06PM
Put your request on the buy/sell/trade page and see what happens. My guess is that someone will come through with one for you.
.............. Re: Fuji Reel Seat
Posted by:
Brian Folz
(---.hsd1.wa.comcast.net)
Date: June 30, 2010 12:01AM
I think I have one around my house someplace that I bought a few years back but didn't like the way it fit with the build I was doing at the time. Very cool looking seat, but I don't have a rod to build with it. Shoot me an email and I'd be happy to set you up with it,
Brian fishbadger@comcast.net Re: Fuji Reel Seat
Posted by:
Bill Falconer
(---.baptist-health.org)
Date: June 30, 2010 01:59PM
Paul -
I have at least one laying around and I have also skinned several of my own with carbon fiber - those look even cooler. Send me an email at falconerb@yahoo.com if you are interested. Bill Re: Fuji Reel Seat
Posted by:
Paul Majewski
(203.62.236.---)
Date: July 01, 2010 08:07PM
Reel seat found. Thank you. Sorry, only registered users may post in this forum.
|