I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

guide for PBShop Rick Clunn series rod
Posted by: Mark Marshall (---.dhcp.jcsn.tn.charter.com)
Date: May 26, 2010 08:10PM

I have a customer needing a casting guide for a Rick Clunn Signature Series rod. The guides are Fiji. Cannot tell the type of ring. The guides are a spin/cast type guide. This was not an expensive rod when purchased. Around $100.

Any ideas would be appreciated!

Options: ReplyQuote
Re: guide for PBShop Rick Clunn series rod
Posted by: Andy Jones (---.gsp.bellsouth.net)
Date: May 26, 2010 09:30PM

As hard as it is to believe for a $100 rod the Rick Clunn rods have Gunmetal Fuji SIC guides on them. Which size do you need? I have a 3/4's of a set I stripped off a rod that I will not use I will send you the size you need .

Options: ReplyQuote
Re: guide for PBShop Rick Clunn series rod
Posted by: Mark Marshall (---.dhcp.jcsn.tn.charter.com)
Date: May 26, 2010 09:48PM

Andy
Thanks, it is gunmetal. I thought it might be SIC but not on a medium priced rod. I will post the size tomorrow. Please check back on the forum.

Thanks
Mark

Options: ReplyQuote
Re: guide for PBShop Rick Clunn series rod
Posted by: Bob Grobolsek (---.dyn.centurytel.net)
Date: May 27, 2010 07:03AM

On another similar note. I have to replace one of the guides as well, and was wondering if anyone had an idea of the thread color used on this rod. It is a dark purple with a metallic blue trim. Thanks.

Bob Grobolsek
Sheffield Village, Ohio

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster