SPONSORS
2024 ICRBE EXPO |
MHX Blank For Senko
Posted by:
Tony Wilson
(---.cinci.res.rr.com)
Date: April 15, 2010 10:38AM
Any suggestions? Tony Wilson Cincinnati Ohio Re: MHX Blank For Senko
Posted by:
Ryan Dietman
(209.202.134.---)
Date: April 15, 2010 11:47AM
There are a few good options. I guess it would depend on your preference, and where/how you'll be fishing the senkos. The MB843 is a good MH rod for throwing around cover. If you wanted to go a little bit lighter you could also look at the SJ843 and SJ842, since these are spin jig blanks, they should have a little softer tip. I like 7ft (+) for this technique to get a little better casting distance. For wacky style around light cover, you could also look at the MB941. My $.02 Re: MHX Blank For Senko
Posted by:
Duane Richards
(---.ronkva.east.verizon.net)
Date: April 15, 2010 11:50AM
MHX SJ842
DR Re: MHX Blank For Senko
Posted by:
kevin merritt
(---.hsd1.fl.comcast.net)
Date: April 15, 2010 06:07PM
SB-812 Blend!!! Throws 'em a mile and has lots of backbone but soft enough tip it won't tear the hook out ! Probably my favorite all purpose soft plastic blank ever! I have built in both spinning and casting configs. Granted, just my 2 cents , but unbelievable performing rod blank! Re: MHX Blank For Senko
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: April 15, 2010 08:13PM
My choice is this blank designed specifically for throwing Sinko's and it’s the best I've found for doing so.
Its; Light, Crisp, Incredibly sensitive, a perfect combination between tip action, power, and balance. Batson RX8+C812 6'9" Medium Fast 8-14 1/4-5/8oz. 1.85oz. Satin Black Senko Special Sorry, only registered users may post in this forum.
|