SPONSORS
2024 ICRBE EXPO |
book
Posted by:
Anonymous User
(---.dhcp.stpt.wi.charter.com)
Date: February 14, 2010 09:58PM
i'm been looking for tom kirkman rod building book, will like to know where can i get one ? if u know a place or website that i can order a book ?
thank josh Re: book
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: February 14, 2010 10:05PM
I think every single supplier has it Re: book
Posted by:
Tom Kirkman
(Moderator)
Date: February 14, 2010 10:20PM
I think he wants the name of the book - It's called "Rod Building Guide" from Amato publications. Most any of the sponsors here would have it.
If you prefer a DVD, the Flex Coat DVD titled "How We Do It" is very good. ............. Re: book
Posted by:
Marco Cellini
(---.ip18.fastwebnet.it)
Date: February 15, 2010 12:56PM
Josh,
you can buy it from one of the following links, they are listed by its cost: [www.wikio.com] [www.amazon.com] . [www.mudhole.com] Ciao Marco Re: book
Posted by:
Tom Kirkman
(Moderator)
Date: February 15, 2010 01:27PM
Always better to buy from a sponsor.
.......... Re: book
Posted by:
Anonymous User
(---.dhcp.stpt.wi.charter.com)
Date: February 15, 2010 02:12PM
tom, that what i'm trying to find a book rod building guide and a dvd how to do it and i'm need a 1 or 2 more book that will able to help me how to wrap the guide with trim and hide the line when finish wrap the guide and i have trying with old rod and practice and i couldnt figure out how to hide the line and wrape a trim ..
or u have a webiste that i can read and how to wrap and hide the line ? Josh Re: book
Posted by:
Tom Kirkman
(Moderator)
Date: February 15, 2010 02:27PM
The book shows how to do that, and a lot more.
............ Re: book
Posted by:
Andrew Wright
(207.14.37.---)
Date: February 18, 2010 04:53PM
the books great. that was the first thing i bought when deciding to start . I also own the Dvd, also informative but the CEO builds the complete rod by hand, and seems to do it all in one day. It was hard to believe but the info was great. The photos in the "rod building guide" are the best for the rod wrapping and show you where and how to pull the thread through to lock it on itself. also just recommend watching videos on youtube they have also been very informative on wrapping and general knowledge about Rod Building. Sorry, only registered users may post in this forum.
|