SPONSORS
2024 ICRBE EXPO |
Downrigger spiral wrap
Posted by:
Mike Canavan
(---.nys.biz.rr.com)
Date: November 17, 2009 01:57PM
Venturing into a downrigger rod build (RDR86MH) -- I've been using the single 90deg "bumper" wrap with success on most baitcasters, but wondered if a Forhan or other type of extended transitional wrap might be better suited for these limber, slower-actioned downrigger rods. Thanks for any recommendations, much appreciated! Re: Downrigger spiral wrap
Posted by:
Peter Sprague
(---.reverse.vilayer.com)
Date: November 17, 2009 03:05PM
Cannot imagine how they would be \"better\" but I am sure they will work just as well. I have used the Simple Spiral on plenty of fast and slow action rods and it works well on either type. LIkewise I have used the Revolver or what us old timers call the \"Roberts\" wrap on both fast and slow action rods and it also works well. Re: Downrigger spiral wrap
Posted by:
Mike Canavan
(---.nys.biz.rr.com)
Date: November 17, 2009 03:38PM
Thanks Peter, you're probably right -- I think I have a larger bend envisioned in the butt-end of the rod than will exist in reality! Re: Downrigger spiral wrap
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: November 17, 2009 03:44PM
I use the simple spiral on thr rigger rods that I build Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Downrigger spiral wrap
Posted by:
Tom Kirkman
(Moderator)
Date: November 17, 2009 04:37PM
The greater the flex in the butt section, the straight your line path will be through the Simple Spiral wrap. Just remember to use a larger ring for the bumper guide and/or position it per the instructions at 100 to 110 degrees.
............ Re: Downrigger spiral wrap
Posted by:
Mike Canavan
(---.nys.biz.rr.com)
Date: November 17, 2009 05:40PM
Thanks for the helpful replies, much appreciated. I'll stick with the bumper wrap. Re: Downrigger spiral wrap
Posted by:
Tom White
(---.nycap.res.rr.com)
Date: November 17, 2009 10:08PM
Mike, I used revolver wraps on all four of my 8'6" mod-action Lamiglas DR rods, they perform great. Tom White Rod & Reel Restoration Re: Downrigger spiral wrap
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: November 17, 2009 10:53PM
Tom,
I think any of the spiral wraps will perform great. I think that it's more personal preference. I just prefer the simplicity of the "Simple or Bumper" method. Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Downrigger spiral wrap
Posted by:
Tony Childs
(---.196.sag.speednetllc.com)
Date: November 23, 2009 01:26PM
Go with the spiral for sure on rigger rods. Your customer will throw away the rest of his standard rigger rods and order more LOL. Simple has worked great for me, never messed with any of the others, but sure they are just as effective. There are absolutely no cons to using a spiral rod for any trolling application, only pros. Sorry, only registered users may post in this forum.
|