SPONSORS
2024 ICRBE EXPO |
9'6" 6 wt blank
Posted by:
Ken Gasior
(---.holland-systems.com)
Date: October 28, 2009 10:12PM
Anyone know where I can locate a reasonably priced 9'6" 6 wt blank? I recently broke the only one I had - a Loomis. They no longer make a 9'6" so they replaced it with a 9'. I like the 9'6" a lot better for float tube fishing. Any leads would be appreciated.
Ken Re: 9'6" 6 wt blank
Posted by:
George Forster
(---.hsd1.co.comcast.net)
Date: October 28, 2009 10:23PM
I would try locating a 9 footer that I liked, and extending the handle by 6". It'll make the rod a little faster, but that could be a good thing, depending on your tastes. Re: 9'6" 6 wt blank
Posted by:
Bill Hickey
(---.nycap.res.rr.com)
Date: October 28, 2009 10:42PM
Ken, I have a 9'-6" Dan Craft Sig III in 6wt, 4 piece. Love the rod and I use it for float tube fishing and larger rivers as nymph rod. Nice medium fast taper and it handles 6wt lines perfectly. No need to over line this rod, I would call it a "light" 6wt. They are a bit on the expensive side though, but worth every penny. If you are looking for a less expensive blank try calling Versitex , they may still have some of the IGFA Pac Bay blanks in that configuration. I've built a bunch of rods on those blanks and they are good preforming blanks. I also think Batson may still make a 9-6 6wt in 2 piece in their RX-7 series. Re: 9'6" 6 wt blank
Posted by:
Bill Hickey
(---.nycap.res.rr.com)
Date: October 28, 2009 10:48PM
Ken, correction on the Dan Craft, its a Sig V not III. Re: 9'6" 6 wt blank
Posted by:
Bill Pulk-Midwest rod and reel
(64.122.91.---)
Date: October 28, 2009 10:51PM
BATSON HAS ONE ... IF996 ...IT IS A 2PC RX7...HERE IS THE LINK [www.batsonenterprises.com]
IF YOU NEED A PRICE LET US KNOW AT MIDWEST ROD AND REEL...WE CAN GET IT FOR YOU Bill@midwestrodandreel.com www.midwestrodandreel.com Re: 9'6" 6 wt blank
Posted by:
Ron Schneider
(---.mthmcmta01.mthoar.lr.dh.suddenlink.net)
Date: October 29, 2009 08:09AM
Hi Ken,
We have both the 9' 6" and 10' for 6 wt in stock. Both in the Batson RX7 series. Here is a link; [www.schneidersrods.com] Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: 9'6" 6 wt blank
Posted by:
Ken Gasior
(---.holland-systems.com)
Date: October 30, 2009 04:32PM
Thanks, guys, all for your advice. All things considered, I plan on going with the Dan Craft Signature V.
Ken Gasior Re: 9'6" 6 wt blank
Posted by:
Bill Hartlage
(---.sip.sdf.bellsouth.net)
Date: October 30, 2009 05:20PM
try dan craft. I built 2 rods on their blank and both my daughter and i think they are great. Sorry, only registered users may post in this forum.
|