SPONSORS
2024 ICRBE EXPO |
RodMaker SE #1
Posted by:
Tom Kirkman
(Moderator)
Date: August 05, 2009 08:17PM
The limited edition RodMaker CD on guide placement is now just about sold out. I have exactly 7 copies left.
[www.rodmakermagazine.com] When these are gone, they're gone. I will be starting on the SE # 2 shortly which will encompass the building of specialty task specific rods. ................ Re: RodMaker SE #1
Posted by:
Sam Hightower
(---.mg.themeganet.com)
Date: August 05, 2009 08:37PM
Can you pre-order SE#2 Sam Hightower Richmond, Va Re: RodMaker SE #1
Posted by:
Tony Politi
(---.dyn.optonline.net)
Date: August 05, 2009 08:41PM
Order sent.
thanks Tony Re: RodMaker SE #1
Posted by:
Tom Kirkman
(Moderator)
Date: August 05, 2009 08:56PM
No pre-orders, please. I'll notify when they're ready.
......... Re: RodMaker SE #1
Posted by:
Alex Dziengielewski
(24.145.81.---)
Date: August 05, 2009 09:21PM
Task specific as in?
Who are the contributing authors? ----------------- AD Re: RodMaker SE #1
Posted by:
Tom Kirkman
(Moderator)
Date: August 05, 2009 09:40PM
The authors run the gamut from Rich Forhan to Ian Miller. People who have a vast amount of expertise in the particular fields in which they have written about.
If you can find a better compilation of information on task specific rods, run and buy it. ............. Re: RodMaker SE #1
Posted by:
Alex Dziengielewski
(24.145.81.---)
Date: August 05, 2009 10:25PM
Good to hear. I was hoping info from Rich's book he gave you at the ICRBE would make it's way into there. ----------------- AD Re: RodMaker SE #1
Posted by:
William Bartlett
(---.br1.dav.wv.frontiernet.net)
Date: August 05, 2009 11:19PM
Order sent!! Bill in WV Re: RodMaker SE #1
Posted by:
Stuart Klose
(---.lns1.per1.internode.on.net)
Date: August 06, 2009 03:37AM
Tom
Are these CDs available through Ian Miller in Australia or do we order them through the website? Stu Klose Re: RodMaker SE #1
Posted by:
Tom Kirkman
(Moderator)
Date: August 06, 2009 07:33AM
Ian hasn't ordered any so I'd have to say that he isn't offering them.
I will only ship within the U.S. .............. Re: RodMaker SE #1
Posted by:
Lyle Stokes
(---.rt-bras.pell.centurytel.net)
Date: August 06, 2009 08:01AM
Order sent, thanks for the reminder Tom. Re: RodMaker SE #1
Posted by:
Chris Garrity
(---.phlapafg.covad.net)
Date: August 06, 2009 09:42AM
If you're on the fence, don't wait: this is worth every penny. It puts a bunch of articles that were in RMM in one place, and it has some new stuff as well. I've had it for about two months, and I've already gone back to it about 100 times to clarify guide issues that were floating around in my head. Re: RodMaker SE #1
Posted by:
Bill Tune
(---.wasco-inc.com)
Date: August 06, 2009 12:28PM
Order sent. Re: RodMaker SE #1
Posted by:
Bill Eshelman
(---.skylan.net)
Date: August 06, 2009 01:00PM
My order should be order # 5. Thanks for the reminder
Bill Ohio Rod Builders Canton, Ohio Re: RodMaker SE #1
Posted by:
Mark Pearson
(---.apacn.com)
Date: August 06, 2009 01:23PM
I think I'm # 6. Hopefully I got mine. Oh Please, Please, Please................. Re: RodMaker SE #1
Posted by:
Robert Owczarski
(---.hsd1.mi.comcast.net)
Date: August 07, 2009 01:18AM
I hope Im #7. Order sent. Re: RodMaker SE #1
Posted by:
Ricardo Morais
(200.185.128.---)
Date: August 07, 2009 04:21PM
Thats a pity that Rodmaker Magazine cannot be sent overseas....
I really like to subscribe it. *G* Regards Rick Morais Brazil Sorry, only registered users may post in this forum.
|