I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

RodMaker SE #1
Posted by: Tom Kirkman (Moderator)
Date: August 05, 2009 08:17PM

The limited edition RodMaker CD on guide placement is now just about sold out. I have exactly 7 copies left.

[www.rodmakermagazine.com]

When these are gone, they're gone.

I will be starting on the SE # 2 shortly which will encompass the building of specialty task specific rods.

................

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Sam Hightower (---.mg.themeganet.com)
Date: August 05, 2009 08:37PM

Can you pre-order SE#2

Sam Hightower
Richmond, Va

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Tony Politi (---.dyn.optonline.net)
Date: August 05, 2009 08:41PM

Order sent.

thanks
Tony

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Tom Kirkman (Moderator)
Date: August 05, 2009 08:56PM

No pre-orders, please. I'll notify when they're ready.

.........

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Alex Dziengielewski (24.145.81.---)
Date: August 05, 2009 09:21PM

Task specific as in?

Who are the contributing authors?

-----------------
AD

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Tom Kirkman (Moderator)
Date: August 05, 2009 09:40PM

The authors run the gamut from Rich Forhan to Ian Miller. People who have a vast amount of expertise in the particular fields in which they have written about.

If you can find a better compilation of information on task specific rods, run and buy it.

.............

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Alex Dziengielewski (24.145.81.---)
Date: August 05, 2009 10:25PM

Good to hear. I was hoping info from Rich's book he gave you at the ICRBE would make it's way into there.

-----------------
AD

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: William Bartlett (---.br1.dav.wv.frontiernet.net)
Date: August 05, 2009 11:19PM

Order sent!!

Bill in WV

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Stuart Klose (---.lns1.per1.internode.on.net)
Date: August 06, 2009 03:37AM

Tom

Are these CDs available through Ian Miller in Australia or do we order them through the website?

Stu Klose

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Tom Kirkman (Moderator)
Date: August 06, 2009 07:33AM

Ian hasn't ordered any so I'd have to say that he isn't offering them.

I will only ship within the U.S.

..............

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Lyle Stokes (---.rt-bras.pell.centurytel.net)
Date: August 06, 2009 08:01AM

Order sent, thanks for the reminder Tom.

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Chris Garrity (---.phlapafg.covad.net)
Date: August 06, 2009 09:42AM

If you're on the fence, don't wait: this is worth every penny. It puts a bunch of articles that were in RMM in one place, and it has some new stuff as well. I've had it for about two months, and I've already gone back to it about 100 times to clarify guide issues that were floating around in my head.

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Bill Tune (---.wasco-inc.com)
Date: August 06, 2009 12:28PM

Order sent.

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Bill Eshelman (---.skylan.net)
Date: August 06, 2009 01:00PM

My order should be order # 5. Thanks for the reminder

Bill

Ohio Rod Builders

Canton, Ohio

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Mark Pearson (---.apacn.com)
Date: August 06, 2009 01:23PM

I think I'm # 6. Hopefully I got mine. Oh Please, Please, Please.................

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Robert Owczarski (---.hsd1.mi.comcast.net)
Date: August 07, 2009 01:18AM

I hope Im #7. Order sent.

Options: ReplyQuote
Re: RodMaker SE #1
Posted by: Ricardo Morais (200.185.128.---)
Date: August 07, 2009 04:21PM

Thats a pity that Rodmaker Magazine cannot be sent overseas....

I really like to subscribe it. *G*


Regards
Rick Morais
Brazil

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster