SPONSORS
2024 ICRBE EXPO |
morton guid placement chart
Posted by:
ed barron
(---.sub-70-211-78.myvzw.com)
Date: August 02, 2009 10:01AM
I have a morton guid placement chart i just picked up and want to use it to place the guids on an 8 foot spinning rod could anyone help me with the set up of the rod and chart and what are your opinions of the chart should i just stick to tradisional set ups i am just a novice builder at best but love to try new things thanks in advace Re: morton guid placement chart
Posted by:
ed barron
(---.sub-75-199-223.myvzw.com)
Date: August 02, 2009 01:21PM
after taking some time thismorning i figured out a way to hang and use the graph without pegboard and found it very easy to use it takes the guess work out of the initial placement and the blank tells you were to place the guids after tapeing the guids fast and doing a static test and some test casts i had to do just some minnor adjustments i think this could become a useful tool for me Re: morton guid placement chart
Posted by:
Tom Kirkman
(Moderator)
Date: August 02, 2009 04:48PM
On very long rods you may find it helpful to place the blank flat on the floor and do everything on that plane instead of a wall where you have limited height.
............ Re: morton guid placement chart
Posted by:
ed barron
(---.sub-75-194-171.myvzw.com)
Date: August 02, 2009 09:01PM
thanks tom i may need to do that at some point Sorry, only registered users may post in this forum.
|