I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

AllStar Specs
Posted by: Phil Rowe (---.hr.hr.cox.net)
Date: August 02, 2009 03:19AM

Would anyone happen to have the specs for the AllStar MS-843, GP-813 and the GS-641 blanks, or where I might find them. Thanks

Options: ReplyQuote
Re: AllStar Specs
Posted by: Spencer Phipps (---.ptld.qwest.net)
Date: August 02, 2009 08:46AM

Give the good people at FishSticks a call.

Options: ReplyQuote
Re: AllStar Specs
Posted by: Jerry Poindexter (---.tx.res.rr.com)
Date: August 02, 2009 09:35AM

I think the MS, GP, and GS must be FishSticks' own coding, as they're not listed that way in my old AllStar catalog.

Options: ReplyQuote
Re: AllStar Specs
Posted by: Jim Gamble (---.187-72.tampabay.res.rr.com)
Date: August 02, 2009 10:00AM

The numbers look a little screwy, but IF they are correct and IF they are definitely All Star blanks ... the numbering system is just like the one used by many vendors (G Loomis, Batson, etc.).

MS843 was actually listed as 843MS = 84", 3 power, Mag Spinning
GP813 ... 813GP = 81", 3 power, Graphite Popping
GS641 ... 641GS = 64", 1 power, Graphite Spinning

IMO, the best bet here would be to utilize CCS/URRS to determine the most suitable applications for the blanks. Do remember that there is no warranty available. I still have a few All Star blanks and they are nice to own ... too bad they went the way of the dodo bird.

Options: ReplyQuote
Re: AllStar Specs
Posted by: Spencer Phipps (---.ptld.qwest.net)
Date: August 05, 2009 06:56PM

What info I have on All Stars still lists a 3 power mag spin and popping rod blanks at 6 to 12 lb test, 1/8 to 3/8 oz lures. The only 641 I see listed was 4 to 8 lb test, 1/8 to 3/8 oz lures.

Options: ReplyQuote
Re: AllStar Specs
Posted by: Phil Rowe (---.hr.hr.cox.net)
Date: August 06, 2009 07:17AM

Thanks to all for the info

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster