SPONSORS
2024 ICRBE EXPO |
packing trouble! help
Posted by:
ian hardie
(---.dsl.easynet.net.au)
Date: July 04, 2009 04:38PM
hi guys, im having a @#$%& of alot of trouble packing a wrap im using Gudebrod 9003 metallic pearl.
it just wont pack nicely anybody got any tips, more-less tension? i pack it nice and tight and it seems to spring back out and if i do get it nice it pulls out further up or down the pattern thanks Ian. Edited 1 time(s). Last edit at 07/04/2009 04:44PM by ian hardie. Re: packing trouble! help
Posted by:
Tom Kirkman
(Moderator)
Date: July 04, 2009 05:16PM
If the spacing is elongated, metallic can be tough to work with. Less tension will generally work better than more. If you can incorporate some regular nylon into the pattern in places, it will tend to help hold the metallic in place.
................ Re: packing trouble! help
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: July 05, 2009 12:43AM
Tom's right. Try to use some contrast color in regular thread to hold things together. It's a good way to add some definitive borders to your pattern by using black or dark blue with the pearl color.
Terry Re: packing trouble! help
Posted by:
Paul O'Connor
(---.rdl7.qld.optusnet.com.au)
Date: July 05, 2009 05:12AM
Ian = where do you live? Looking at your email address - is it Mackay in Queensland? Re: packing trouble! help
Posted by:
ian hardie
(---.dsl.easynet.net.au)
Date: July 05, 2009 03:09PM
thanks for the help guys i backed off the tension a fair bit and put a few runs of white nylon in and it worked well, and you can hardly notice it.
Yeah Paul im in Mackay queensland. But i dont use that email address. Cheers Ian........ Edited 1 time(s). Last edit at 07/05/2009 03:13PM by ian hardie. Sorry, only registered users may post in this forum.
|