SPONSORS
2024 ICRBE EXPO |
EVA Inlays
Posted by:
Alex Dziengielewski
(---.aik.sc.atlanticbb.net)
Date: January 03, 2009 09:56PM
Going to try my hand at some simple EVA inlays... just simple rings.
Tried a search and couldn't find anything. Couple questions: Best way to cut the EVA block (from mudhole) I am using for the majority of the grip? 18" long, need about a 3" section. What's the best way for a nice smooth cut? What's the best way to adhere the inlay foam? Contact cement? Put it in a clamp like you do with cork rings? How long? Thanks... Saturday night experimentation... ----------------- AD Re: EVA Inlays
Posted by:
Rob Hale
(---.northstate.net)
Date: January 03, 2009 10:09PM
I think Rodmakers Magazine had a full story on how to do this awhile back. You might already have it.
I cut mine with a piece of heavy rod winding thread while the grip is spinning in the lathe. Cuts like butter and you get a nice, straight cut. I would turn it round first though. Weldwood Contact Cement, the yellow snot like stuff, is the best adhesive for gluing the pieces together. Good luck! Re: EVA Inlays
Posted by:
Alex Dziengielewski
(---.aik.sc.atlanticbb.net)
Date: January 03, 2009 10:11PM
Thanks. It's tough when you need a volume you don't have and you want to experiment that night. ----------------- AD Re: EVA Inlays
Posted by:
Rob Hale
(---.northstate.net)
Date: January 03, 2009 10:13PM
It's not hard at all hard to do. And easy to get nice effects even with just simple rings. Re: EVA Inlays
Posted by:
Michael Joyce
(---.hsd1.nh.comcast.net)
Date: January 03, 2009 11:10PM
Experiment with contact cement, no clamps and a band saw with a 24 tpi blade?
Saturday night experiments rule...dont get hurt. MJ NERB that types with a bar of Ivory soap in his mouth. Re: EVA Inlays
Posted by:
Anonymous User
(---.ptld.qwest.net)
Date: January 03, 2009 11:11PM
Rob is on the money with his help, just a couple extra's for you
DO NOT WRAP the thread or, I use 30# fishing line around your fingers or hands, just hold it tight between your pointing finger and your thumb, when and it will happen the foam or mandrel catches the string just let go, natural reaction to do so. When gluing up, if your just doing rings glue the same as cork using contact cement(Weldwood), and clamp just like your cork rings. Re: EVA Inlays
Posted by:
Alex Dziengielewski
(---.aik.sc.atlanticbb.net)
Date: January 03, 2009 11:12PM
so far got block cut... inlays cut... dry set up looks good...
String worked great even without rounding the block. about to spread cement.... we'll see if I am coherent after the use of that stuff! stay tuned. ----------------- AD Re: EVA Inlays
Posted by:
Michael Joyce
(---.hsd1.nh.comcast.net)
Date: January 03, 2009 11:20PM
Keep the can wide open and the windows closed ...its saturday night!!!!!!!! lol. Re: EVA Inlays
Posted by:
Alex Dziengielewski
(---.aik.sc.atlanticbb.net)
Date: January 03, 2009 11:27PM
BAH.... contact cement is all dried up.
More to come tomorrow... ----------------- AD Re: EVA Inlays
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 03, 2009 11:46PM
Remember that when the two surfaces touch, that's it!! I usually use a long threaded rod and slide all the pieces on to at least an inch apart and coat both surfaces of each piece with CC and let dry for about an hour and then push together. Craft foam and those Foam door hanger, etc sheets from Craft stores make good trim rings also Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: EVA Inlays
Posted by:
Alex Dziengielewski
(---.aik.sc.atlanticbb.net)
Date: January 04, 2009 01:06AM
That's exactly what I am using as the inlay rings MIke. Hobby Lobby had 50 piece 8.5"x5.5" variety pack (2 sheets of each color) for $4.99 on sale 30% off today.
It's raining and foggy... perfect solution to a stuck inside day. Until you have no contact cement. Now I gott find some tomorrow. ----------------- AD Re: EVA Inlays
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 04, 2009 01:39AM
I get those same packs from Michaels Crafts!! Great stuff/Great price Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: EVA Inlays
Posted by:
Michael Joyce
(---.hsd1.nh.comcast.net)
Date: January 04, 2009 02:41AM
Sory about your contact cement.........mine works just fine. lol Re: EVA Inlays
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: January 04, 2009 10:46AM
2 coats of CC on craft foam or it pulls apart. MAke sure the CC is DRY before you press together. Cutting teh blocks teh easiest way is with a power saw type of thing, next best is a serrated kitchen knife, GInsu is ideal. IT leaves a rough surface to say teh least, but you should be able to work with it much easier. Teh thread works great on a rounded piece, I'd be afraid to cut square stock in a lathe with thread, too mch of a chance that the thread might catch. But if it worked for you that's all tha matters. Re: EVA Inlays
Posted by:
Gary Lowe
(---.hsd1.nj.comcast.net)
Date: January 04, 2009 10:49AM
I use a dual cutter. It makes for exact same size thicknesses. You can get it at Widget Supply [www.widgetsupply.com]. Re: EVA Inlays
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 04, 2009 11:15AM
Gary,
That looks like a great idea. How long are the blades? How deep does it cut? Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: EVA Inlays
Posted by:
Gary Lowe
(---.hsd1.nj.comcast.net)
Date: January 04, 2009 12:24PM
They cut to about 5/8â€Â. You obviously have to turn the block first. Works great on pre-turned stock grips. Re: EVA Inlays
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 04, 2009 12:42PM
Thanks!!! Another toy to explain to the "keeper of the funds"!! Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: EVA Inlays
Posted by:
Alex Dziengielewski
(---.aik.sc.atlanticbb.net)
Date: January 04, 2009 06:37PM Sorry, only registered users may post in this forum.
|