SPONSORS
2024 ICRBE EXPO |
Drum dryer
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 26, 2008 04:20PM
Tom,
In your drum wrapper: [www.rodbuilding.org] What was the particular motor that you used to power the dryer? Thanks much Roger Re: Drum dryer
Posted by:
Tom Kirkman
(Moderator)
Date: December 26, 2008 04:22PM
I sold it to Sammy Mickel a while back so he'd have to look it up - I'll try to remember to ask him to look up the make and model number for you. I do recall that it was a very heavy duty, commercial grade continuous duty motor with fan. It runs for hours on end, even under heavy load.
I geared the motor down to give me about 10 RPM on the drum. I believe the motor itself turned about about 30 RPM. ............ Re: Drum dryer
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 26, 2008 07:28PM
Tom,
Thanks for the update. The speed and general type was the information that I was looking for. Thanks again. Roger Re: Drum dryer
Posted by:
Sammy Mickel
(---.nclxtn.lexcominc.net)
Date: December 27, 2008 09:08AM
Roger I'll get you the info before lunch today. Sammy Re: Drum dryer
Posted by:
Sammy Mickel
(---.nclxtn.lexcominc.net)
Date: December 27, 2008 09:53AM
Roger I couldn't get the brand name but if you will call Grainger with this info I believe they can set you up.
Motor reference # YGM-6011-2 115 v 60 hz 2430 3M103 10 rpm Sorry, only registered users may post in this forum.
|