SPONSORS
2024 ICRBE EXPO |
Re: Question For Rod Builders
Posted by:
eric zamora
(---.dsl.frsn02.pacbell.net)
Date: November 20, 2008 12:08AM
here's another vote for a guide foot grinder, even if it's an attachment or compliments to a common tool like a dremel, specially designed for various types of guides. and make it $19.95!!! lol
eric fresno, ca. Re: Question For Rod Builders
Posted by:
Michael Joyce
(---.hsd1.ma.comcast.net)
Date: November 20, 2008 12:17AM
Orings , small wheels with bearings, more tension devices, reverse tension devices for an old Clemens or newer Renzetti, conical springs, nylon bushings and washers....If I were just starting out, it would be great to have an outlet that carried enough stuff to build my own wrapping lathe. Wives (or husbands for some), dont really like a $300 plus purchase for a lathe, THEN the blank and components etc... big start up cost..........."But honey, look at what I'm saving by building the wrapper myself, and we can get a blank for you too!!!" ....sewing machine motors, foot pedals....................... Re: Question For Rod Builders
Posted by:
Roy Zeringue
(204.9.215.---)
Date: November 20, 2008 12:54AM
Thanks Raymond I hadn't seen those.
Roy Re: Question For Rod Builders
Posted by:
robert smith
(---.hsd1.pa.comcast.net)
Date: November 20, 2008 04:13AM
Here the thing about trying to make money off of selling mechanical products to rod builders. We're notorious tinkerer's. It's why we are so enthralled with the craft. Once we see the design, it in our nature to try and do it for ourselves. Good luck, but once you let the cat out of the bag, it's out for good.
RS Oh yeah, a design for that guide foot machine would be much appreciated. Re: Question For Rod Builders
Posted by:
Richard Hahn
(---.hsd1.md.comcast.net)
Date: November 20, 2008 08:17AM
Definitely guide alignment tool ........... I start at the top and it's still a pia Re: Question For Rod Builders
Posted by:
Anonymous User
(Moderator)
Date: November 20, 2008 08:50AM
Some builders do tinker, but most never build their own tools. Most never build their own grips, or seats, etc. The vast majority tend to buy these things premade, both tools and component assemblies.
This is why companies who make wrapping jigs and lathes have managed to stay in business for so many years. .............. Re: Question For Rod Builders
Posted by:
Buzz Butters
(---.ripon.k12.wi.us)
Date: November 20, 2008 09:54AM
Burnishing tool. I use the standard plastic issue model, but after a couple of dozen rods or so the "edge" used for packing and aligning the ends of the wraps becomes worn and rounded and is no good for that task. I was thinking along the lines of a metal burnishing tool but then to have a defined edge on the tool I am concerned about scratching the finish on the blank. Have you thought about adding something along these lines to your tools?
Buzz Re: Question For Rod Builders
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: November 20, 2008 10:01AM
Three years ago two rodbuilders built a better spiral wound reamer and introduced them at the ICRBE in Charlotte - many builder tinkerers looked at them and decided to build their own and a few purchased them at the show - Ask Mudhole and the Batson vendors if good tools will sell. You would be completely blown away if the numbers were exposed! Re: Question For Rod Builders
Posted by:
Lance Dupre
(---.hsd1.la.comcast.net)
Date: November 20, 2008 10:17AM
If I had to sit down and try to design a tool for rodbuilding it would definately not get done. I don't have the time to tinker and play with different designs just to try to save a couple of bucks. If the tool that I need is available I'm buying it from someone.
I appreciate the guys that are into building the better mousetrap and offering it for sale. Lynn, keep on working on these things and you'll find that some rodbuilders will wait in line to buy your new tools. Lance Re: Question For Rod Builders
Posted by:
Bill Marchisella
(---.proxy.aol.com)
Date: November 20, 2008 10:24AM
How about some type of tool that cuts thin slices of eva for inlays accurate to 1/16 of inch or less.
I have developed one that does, but I was told that nobody would be interested in it, So I kept it for myself. Is there any interest now ? Bill Marchisella Re: Question For Rod Builders
Posted by:
Terry LaValle
(---.ips.paulbunyan.net)
Date: November 20, 2008 12:02PM
The Dream Reamers were a start in the right direction now we need one that fits into a drill that doesn't get hot, melt, shred, warp, smoke, and tear. Just in front of the mixing cups with the lines on the inside, this is my biggest pet peave. I hate reaming cork to no end. Re: Question For Rod Builders
Posted by:
Chuck Mills
(---.grenergy.com)
Date: November 20, 2008 12:18PM
1) A handle assembly clamp based on a trigger clamp instead of rubber tubing.
2) Bench top tool organizer. 3) A better burnishing tool. Re: Question For Rod Builders
Posted by:
Michael Ortega
(---.va.neustar.com)
Date: November 20, 2008 12:20PM
I need the ability to make "molds" for handles. I normally only use 4-5 different handle designs (all eva foam) and It sure would be nice to be able to create my own mold that shapes the eva for me. Kind of like a mechanical mold, with sandpaper slots so you can change the grits out. This would save time and mess, if they had a box on the bottom to catch all shavings, or a shop vac hookup..... Oh boy I would REALLY love to have this machine.....
If thats too difficult, I agree with the guide foot grinder, I use a small hand file and could never get mine down like some of the pros here, and especially on the micro's. I cant tell you how sore my left forefinger is from filling through my fingernail trying to hold these guides... -Mike Re: Question For Rod Builders
Posted by:
Michael Ortega
(---.va.neustar.com)
Date: November 20, 2008 12:24PM
Oh yeah, I would also love a better way to straighten guides, I hate constantly second guessing myself if the rod is twisted 1mm to the right or left you can never make yourself agree on what is straight.....Drives me batty sometimes...
-Mike Re: Question For Rod Builders
Posted by:
Vern Metcalf Jr
(---.mn.warpdriveonline.com)
Date: November 20, 2008 12:43PM
I would like to see a rehostate that runs in reverse as well as forward, this way if you have to unwind a fair amoung of thread, (stupid mistake) you dont have to try and get the starting point to unwind it, plus it would be faster.
Again, another vote for Tom's idea. Re: Question For Rod Builders
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: November 20, 2008 03:58PM
Bill Marchisella,
I think that many would be very interested in your device, especially if it would slice thin pieces of cork also! I know that I would Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Question For Rod Builders
Posted by:
Ken Finch
(---.coi.bellsouth.net)
Date: November 20, 2008 04:19PM
I would like to see some sort of a clamp that would securely hold a rod blank without damaging it. Not sure I can explain it fully. But I hate when I try to set up a casting rod and have the reel on the rod. The blank keeps flipping over. Or when I have tried to dismantle a grip or handle and need to securely hold the rod somehow but I know a vise will break the blank. There must be some way to securely but gently clamp a rod blank in a single position.
Build it and they will buy it. I sure will! Re: Question For Rod Builders
Posted by:
Bill Marchisella
(---.proxy.aol.com)
Date: November 20, 2008 05:32PM
Sorry, Mike,it only cuts eva. I wish it did cut cork. I have adapted it to my Renzetti
and it cuts very well. Bill Marchisella Re: Question For Rod Builders
Posted by:
Jan Veenema
(---.se.biz.rr.com)
Date: November 20, 2008 05:34PM
Thanks Don!! I'm gonna give them spring-clips a try Re: Question For Rod Builders
Posted by:
Chris Davis
(---.knology.net)
Date: November 20, 2008 05:39PM
Mike-cork can be cut in very thin slices on a turning mandrel with a piece of stainless leader wire-duplicating slice thickness I have not worked on. Plastic over leader wire has to be removed of course. Twist in wire makes very neat cut. EVA cuts the same way just as well.
Chris. Sorry, only registered users may post in this forum.
|