I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

nanolite
Posted by: Chia-Chien Goh (---.unknown.charter.com)
Date: November 02, 2008 10:52PM

Anybody know the vickers hardness rating and the specific heat of the American Tackle Nanolite Rings? Thanks much.

Options: ReplyQuote
Re: nanolite
Posted by: Russ Pollack (---.mclnva23.covad.net)
Date: November 02, 2008 11:11PM

Why not call American Tackle directly and ask them?

Uncle Russ
Calico Creek Rods

Options: ReplyQuote
Re: nanolite
Posted by: Gene Carriker (---.dhcp.roch.mn.charter.com)
Date: November 02, 2008 11:18PM

Joe Meehan at American Tackle is very helpful and responds quickly to the emails I have had with him ... good people to work with ... his email is: joe@americantackle.us ... I just got some nanolites in and they look good but I don't know the hardness rating. Might let me know as well when you find out. Gene

Options: ReplyQuote
Re: nanolite
Posted by: Jim Gamble (---.187-72.tampabay.res.rr.com)
Date: November 02, 2008 11:27PM

Nanolite was previously reported by Joe at 1800VH ... however, it wouldn't hurt to recheck the data.

Options: ReplyQuote
Re: nanolite
Posted by: Chris Davis (216.186.210.---)
Date: November 03, 2008 12:11AM

Is there a place where I can find information that has been compiled on hardness of the various ring materials?

Chris

Options: ReplyQuote
Re: nanolite
Posted by: Jim Gamble (---.187-72.tampabay.res.rr.com)
Date: November 03, 2008 07:26AM

ALL that information can be found right here in the archives ... like everything else - LOL.

Here's a link to the search ... [www.rodbuilding.org].


Chris Davis Wrote:
-------------------------------------------------------
> Is there a place where I can find information that
> has been compiled on hardness of the various ring
> materials?
>
> Chris

Options: ReplyQuote
Re: nanolite
Posted by: Chris Davis (216.186.210.---)
Date: November 03, 2008 07:32AM

Thanks Jim-Not the 1st time I've spoken before thinking! LOL

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster