SPONSORS
2024 ICRBE EXPO |
Help with guide spacings
Posted by:
Tom Slater
(124.186.167.---)
Date: August 13, 2008 06:41AM
Hey guys
about to build my first decent baitcasting rod, and well i wouldnt really know where to start to work out guide spacings. im all good with spinning but not so for Baitcasters the blank is a G Loomis MB783 IMX so is there any specific way to work out general spacings before you tweak them using static tests? Re: Help with guide spacings
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: August 13, 2008 07:02AM
Hi Tom,
Try this: [www.gloomis.com] Then static test to tweek guides Hank On The Rocks Fishing Wells, ME. Re: Help with guide spacings
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: August 13, 2008 08:13AM
Here is a link to the article on guide spacing from the library. There are also several other articles in the library that you may find beneficial
[www.rodbuilding.org] Re: Help with guide spacings
Posted by:
Bill Colby
(---.charlotte-15rh16rt-16rh15rt.nc.dial-access.att.net)
Date: August 13, 2008 09:05AM
The spacing charts are fine to get started with. They will work fine. But in time you will want to learn how to space guides yourself so that you'll always be able to "do it on the fly" so to speak. It's not hard and you might even find it to be a lot of fun. Re: Help with guide spacings
Posted by:
mike harris
(---.borgwarner.com)
Date: August 13, 2008 01:40PM
One thing to keep in mind is whether it will be a spiral wrap or guides on top. If it will be a spiral wrap you can use some of the very low guides like Alconite’s or LSG’s, if it will be built with the guides on top you really should use one of the taller single foot guides like the ALPS. Re: Help with guide spacings
Posted by:
Karry Batson
(---.olympus.net)
Date: August 13, 2008 03:31PM
Not a loomis spec but this worked for me.
Rod Blank Model # Rainshadow IMB783 Butt cap: EVABC20 Forecast EVA butt cap Front Cap: Rear Grip: RG7A OR RG9A Handle Arbor: Reel Seat: GTBTG16C-13.0-TC Forecast Textured exposed trigger seat Reel Seat Shim Foregrip: FG25A-250 Winding Check: BWC10 Hookeeper: TCHKS Tip Top XTCPPZT06R05.5 1st guide from tip top XTCLXNZG06 Alps SS316 Light XN Tich plated with Zirconium ring 2nd guide from tip top XTCLXNZG06 3rd guide from tip top XTCLXNZG06 4th guide from tip top XTCLXNZG07 5th guide from tip top: XTCLXNZG07 6th guide from tip top: XTCLXNZG08 7th guide from tip top: XTCLXNZG10 should be at or close to 180 straight down. 8th guide from tip top: XTCLXNZG06 Bumper guide should be around 90 to the side opposite of the handle on reel 9th guide from tip top: XTCLXNZG12 Put this guide straight up or just slightly over opposite direction of handle on reel 10th guide from tip top: 11th guide from tip top: 12th guide from tip top: 13th guide from tip top: 14th guide from tip top: 15th guide from tip top: 16th guide from tip top: Guide spacing Specs(inches from tip, center ring over mark) 4-8-12-16.5-22.25-28-35.5-39.5?-44 Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Sorry, only registered users may post in this forum.
|