SPONSORS
2024 ICRBE EXPO |
OD of Pac Bay AF2
Posted by:
Dave George
(---.qld.bigpond.net.au)
Date: August 13, 2008 02:07AM
Gday Viewers, I'm wanting to know the OD of a pac bay af2 fighting butt cap where it meets the grip. In millimeters if possible. Greatly appreciated.
Dave. Avast Ye Matey Edited 1 time(s). Last edit at 08/13/2008 02:08AM by Dave George. Re: OD of Pac Bay AF2
Posted by:
Ron Schneider
(---.dh.suddenlink.net)
Date: August 13, 2008 08:40AM
Hi Dave,
They are .875", 22.225 mm on the OD Pac Bay and Batson sizes are nearly identical on this item. Hope this helps, we stock both. Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: OD of Pac Bay AF2
Posted by:
Dean Pertot
(---.proxy.aol.com)
Date: August 13, 2008 08:43AM
Dear Dave:
The measurement is 22mm. Dean donartrods.com Re: OD of Pac Bay AF2
Posted by:
Rocky Ryanto
(---.rivrw6.nsw.optusnet.com.au)
Date: August 13, 2008 12:51PM
hi,
sorry for the stupid question, but what is an OD? thanks rocky Re: OD of Pac Bay AF2
Posted by:
John Martines
(---.proxy.aol.com)
Date: August 13, 2008 03:53PM
Outer diameter OD! . ID inner diameter! Re: OD of Pac Bay AF2
Posted by:
Dave George
(124.186.234.---)
Date: August 14, 2008 02:10AM
Thank you gentlemen.
Dave. Avast Ye Matey Sorry, only registered users may post in this forum.
|