SPONSORS
2024 ICRBE EXPO |
Max seal
Posted by:
Dave Borkowski
(---.hsd1.pa.comcast.net)
Date: April 26, 2008 11:39PM
This post is in reference to one of the answers to the caution w/ extreme camo blanks post. The answer was to use max seal over painted rod blanks. I've never heard of this product before so, I was hoping to get some info on this product. Thanks to John Martines I now know it's a hybrid water based poly but, that's all. So, anymore info would be greatly appreciated because I can't fine any info online.<>Dave Re: Max seal
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: April 27, 2008 12:21AM
It's a water based polyurethane finish that is non yellowing and very hard, yet flexible and makes a great high gloss finish for wood grips/seats. I haven't used it on rods but I know several that do and love it! It's manufactured by a California company called Polymer Products [portal.wowway.net] Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Max seal
Posted by:
Brad Young
(---.dhcp.kgpt.tn.charter.com)
Date: April 27, 2008 07:21AM
Year before last at the Big Show I believe that Ken Preston taught a class and said that he uses this stuff instead of color preserver. He said that it works great for that application. I need to try it my self. It seems that you can use it on almost anything dealing with rod building. Re: Max seal
Posted by:
Dave Borkowski
(---.hsd1.pa.comcast.net)
Date: April 27, 2008 07:26AM
Thanks Mike the link help a lot and I got all the info I needed.
<>Dave Re: Max seal
Posted by:
David Gilberg
(---.pghkny.east.verizon.net)
Date: April 27, 2008 08:40AM
I have had great success applying a spray coat of Krylon Crystal Clear over paint enamel paint to act as a sealing barrier. Then I coat the blank with Permagloss which is a great thin durable finish.
I will look into Max Seal as I am always interested in new products and Max was my Dad's name. David Re: Max seal
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: April 27, 2008 08:46AM
I think I remember Ken saying it is used to seal Bridges when sand blast them. Pretty durable stuff!! Freddwhy (Rapt-Ryte) Re: Max seal
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: April 27, 2008 12:09PM
i have used it to topcoat blanks after painting them. it is water thin and easy to work with. you can wipe it on or dip it. if you dip it hang it tip down and the excess will roll down the tip. it should not remove the paint or covering like permagloss. it is much easier to use and clean up. it will be dry in a few hours. multiple coats are fine as well. Re: Max seal
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: April 27, 2008 01:55PM
David G.
I use it exclusively after a paint job. Holds up just as well as PG without the smell, and water clean up. Plus if you have extra, you don't have to pitch it just pour it back into the bottle. AAAANNNNDDDDD, you don't have the humidity problem, it cures by evaporation. I've applied as JP, and also by putting 2 piece blanks on the drier and brushed on with a spong brush. Well actually not brushing, but using a wide sponge brush and aplying just like you would epoxy. Works great!!! Bill in WV Re: Max seal
Posted by:
Tony Scott
(---.hsd1.md.comcast.net)
Date: April 27, 2008 02:35PM
Who else out there has used it as CP? Ken Preston turned me on to it, but I have been using a couple of other products after noticed it did alter the color slightly versus another "standard" CP that everyone knows and loves. Re: Max seal
Posted by:
John Martines
(---.proxy.aol.com)
Date: April 27, 2008 02:49PM
Sorry Dave, I meant to send you an E-mail but I think it was locked. Mr. Bartlett is the one to thank. I used this over a brown oil based stain on a old Conolon fiber blank and it's great stuff and so easy to use it takes all the fun out of it, LOL. Re: Max seal
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: April 28, 2008 02:49AM
Who sales it?
Good Wraps Bob Re: Max seal
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: April 28, 2008 03:32PM
Bob,
Check your email. Bill in WV Re: Max seal
Posted by:
Henry Engle
(---.nyc.res.rr.com)
Date: April 29, 2008 09:32AM
err why is it a secret who sells it? Please email me to if you know the best place to get it. Thanks.
On another note i believe this is the stuff alot of lure builders are using to coat jigs and things like this to make the finish more durable. Edited 2 time(s). Last edit at 04/29/2008 09:33AM by Henry Engle. Sorry, only registered users may post in this forum.
|