SPONSORS
2024 ICRBE EXPO |
Pac Bay Epoxy mixer
Posted by:
Bill Giokas
(---.bfd-dynamic.gis.net)
Date: April 04, 2008 05:35PM
Get your self one ot these babies. What a difference it makes on mixing Flexcoat. Glass clear and no bubbles to worry about. What a wonderful product. Bill Re: Pac Bay Epoxy mixer
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: April 04, 2008 11:59PM
Hi Bill,
Did you notice that the pot life is longer? I did! Capt Neil Faulkner Re: Pac Bay Epoxy mixer
Posted by:
Henry Engle
(---.nyc.res.rr.com)
Date: April 05, 2008 05:56AM
I was leaveing the bearing in the cup while I applied my finish pehaps it has to do with that helping to keep it cooler for longer pot life or could be a more thorough mixxing? I also believe there is less chance of the finish not cureing correctly do to poor or lazy hand mixing procedures using this machine also. Anyway i love mine! Edited 1 time(s). Last edit at 04/05/2008 05:56AM by Henry Engle. Re: Pac Bay Epoxy mixer
Posted by:
Ken Finch
(---.coi.bellsouth.net)
Date: April 05, 2008 08:40AM
I made one from the plans in Rodmaker about five years ago. I know some do not like the idea of the mechanical epoxy mixer, but mine has worked perfectly for me every time. No more bubbles! Well, at least none in my mix, I still end up creating some when I apply it but the mix is perfectly clear even from those tiny little micro bubbles I used to get in my hand mixed batches. Re: Pac Bay Epoxy mixer
Posted by:
Chuck Mills
(---.gctel.stellarllc.net)
Date: April 05, 2008 09:09AM
I love mine. I haven't noticed a pot life difference yet - I'll have to check on that. What I did notice is that it frees up 4 or 5 minutes to do something else every time I mix a batch of finish!
Chuck Re: Pac Bay Epoxy mixer
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: April 05, 2008 04:02PM
I got one!! Haven't had a problem with any finish since!! Bill in WV Re: Pac Bay Epoxy mixer
Posted by:
Terry Reece
(---.hr.hr.cox.net)
Date: April 06, 2008 01:09PM
Got mine in the mail a couple days ago. Going to use it for the first time in a few days once I finish a few more guide wraps. Can't wait! Sorry, only registered users may post in this forum.
|