SPONSORS
2024 ICRBE EXPO |
Split Grips
Posted by:
Richard Hahn
(199.173.225.---)
Date: January 14, 2008 03:23PM
Where can I get the components for split grips .......... particularly the reel seats like these
[www.tidalfish.com] Re: Split Grips
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: January 14, 2008 04:17PM
Richard;
Unless people are registered on that site all they will get is the registration page Re: Split Grips
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: January 14, 2008 04:34PM
Like Steve says, many of us can't see it. However, if you can describe what you are looking for, I can tell you how I have make them myself; and I'm a novice guy with very little special equipment to work with so I feel sure you can make pretty much whatever you want. Re: Split Grips
Posted by:
Richard Hahn
(199.173.226.---)
Date: January 14, 2008 04:53PM
Sorry you can't access it ......... it's a yellow rod that they sold at the Timonium (MD) boat show last weekend ....... essentially it's a rodseat the mounts right to the blank and you are holding the naked blank and reel on the reelseat .......... now that should be sensitive ...........
tried to post a picture on the picture section of this site but it asked me for my login and password which I entered and it told me it was invalid eventhough I'm logged into this forum section ........... Re: Split Grips
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: January 14, 2008 04:56PM
edit Edited 1 time(s). Last edit at 01/14/2008 09:24PM by Bill Stevens. Re: Split Grips
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: January 14, 2008 05:00PM
The photo login is a separate animal. I got stumped on that myself a while back until TK cleared me up. Re: Split Grips
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: January 14, 2008 05:03PM
If you're not going to ICRBE, take a look at the split grips 2/3 of the way down this page --> [] Those are machined to fit the rear of a Fuji "blank exposed" trigger seat. Mark Griffin [] C&M Custom Tackle San Dimas, California Re: Split Grips
Posted by:
Richard Hahn
(199.173.224.---)
Date: January 14, 2008 05:12PM
Thanks Mark ......... but these look like there is a front hood with a turn adjustment .............. the exposed blank ........... and a rear hood ....... and that's basically it except for a butt cap Re: Split Grips
Posted by:
Chuck Mills
(---.gctel.stellarllc.net)
Date: January 14, 2008 05:43PM
Richard, are you talking about the E21 Carrot? Orange? Re: Split Grips
Posted by:
Richard Hahn
(199.173.226.---)
Date: January 14, 2008 06:07PM
it is definitely orange ....... Re: Split Grips
Posted by:
Spencer Phipps
(65.197.242.---)
Date: January 14, 2008 06:41PM
Richard none of this is new, in the 80s Shimano had an entire line or ods built with the reelseat built into a swelled section in the blank. They called them the SpeedMaster, BeastMaster and who knows whatMaster rods in spinning and casting. Cabelas had some also that may have been built by Shimano. Airrus rods brought it back a few years ago. Re: Split Grips
Posted by:
stan mclean
(---.hsd1.nh.comcast.net)
Date: January 15, 2008 01:52AM
Do you mean something like this- [www.rodbuilding.org]
If so it is a Fuji ECSM seat cut up, this particular seat has been painted. There are many pictures of these type of reel seats just do a search for split reel seat. Hope that helps. Re: Split Grips
Posted by:
Richard Hahn
(199.173.226.---)
Date: January 15, 2008 12:07PM
Stan, Olaf ........... yes ...... those are exactly what I'm talking about ....... Sorry, only registered users may post in this forum.
|