SPONSORS
2024 ICRBE EXPO |
Choker Guide Location
Posted by:
Roger Rierson
(---.triad.res.rr.com)
Date: August 17, 2007 11:20AM
I am trying to figure the location of choker guide on first build. I understand in, ft, yds but mm i get a little lost. I will list what i have now and hope someone advise if i am on the right path.
1) 42mm diameter of reel spool. 2) 42 x 27 =1134 3) 1134 / 25.400= 44.6 ins. 4) I used 25.400mm from conversion chart for 1 in. Am i in the ball park or in left field. Thanks. Re: Choker Guide Location
Posted by:
Anonymous User
(Moderator)
Date: August 17, 2007 12:15PM
You're in the ballpark, but why not just dump the inches altogether - you don't need them. Just put the choker guide 1134mm (or... 113.4cm or 11.34dm) past the reel spool face.
But yes, if you convert to inches it would be 44.6 inches. ............... Re: Choker Guide Location
Posted by:
Ash Carlton
(---.cpm.net)
Date: August 17, 2007 01:33PM
Roger - I have a wonderful little program that I use for work. It's called convert.exe It's really little so I can email it to you if you like. Re: Choker Guide Location
Posted by:
Roger Rierson
(---.triad.res.rr.com)
Date: August 17, 2007 02:13PM
I would like that Ash. thank you Sorry, only registered users may post in this forum.
|