SPONSORS
2024 ICRBE EXPO |
flexcoat cleanup
Posted by:
Keith Terlinden
(---.static.izoom.net)
Date: April 27, 2007 08:42AM
I have had drops of flexcoat drip onto my rod wrapper over the years and dry on. Wondering is anybody has found a cleaning solution that would take it off. I have a Batson wrapper.
Thanks Keith Re: flexcoat cleanup
Posted by:
Michael Sledden
(---.fsepg.com)
Date: April 27, 2007 08:48AM
I just use some form of a scrapper and pop them off. Re: flexcoat cleanup
Posted by:
Anonymous User
(Moderator)
Date: April 27, 2007 11:50AM
Put a coat of car wax down on the bed and in the future such finish drops can be easily popped off with a thumbnail or plastic butter knife.
........... Re: flexcoat cleanup
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: April 27, 2007 01:55PM
Keith,
Try using a little heat from a hair drier or craft heat gun. They should soften enough to pop off with a plastic putty knife or scraper. Just like stripping and old rod to refinish. Bill in WV Re: flexcoat cleanup
Posted by:
bill boettcher
(---.an1.nyc41.da.uu.net)
Date: April 27, 2007 02:23PM
A new razor blade. Sorry, only registered users may post in this forum.
|