SPONSORS
2024 ICRBE EXPO |
Can't getta grip
Posted by:
edward torres
(---.dsl.snantx.swbell.net)
Date: April 27, 2007 08:32AM
I had a guy drop off a rod (old school) w/Varmax reel seat w/grips that look like hypolon/rubber mix, heavy, he called them nylon grips. I don't know where or how I would even get a hold of the same type of material. Of course, b4 I decided to do the work I made it clear it might have to be replaced with either EVA or Hypolon. Any suggestions would be appreciated. Rod, Reels and 18 wheels. Re: Can't getta grip
Posted by:
Anonymous User
(Moderator)
Date: April 27, 2007 09:52AM
Never heard of nylon grips. You've most likely got EVA, Hypalon, or rubber type.
Could you post a photo on the photo page so we can see what you've got. .............. Re: Can't getta grip
Posted by:
Anonymous User
(---.ptld.qwest.net)
Date: April 27, 2007 11:09AM
Ed, what color are the grips and are they hard like wood hard, are they spotted, like some kind of composite? Re: Can't getta grip
Posted by:
fred schoenduby
(---.dsl.chi2ca.sbcglobal.net)
Date: April 27, 2007 06:41PM
What we have here sounds like possibly an old Harnell or Harrington [same people] with tan in color rubber grips that were very heavy.
There is no way you can replace these to look original....if they are in good shape ,wipe them down with lacquer thinner [wear gloves] and you may find a Harnell logo on the grips. If they are a basket case replace with Hypalon. Tight Lines Tight Wraps Fishin'Stix by Fred Sorry, only registered users may post in this forum.
|