SPONSORS
2024 ICRBE EXPO |
9ft 4wt Dan Craft sig V guide spacing
Posted by:
Jean-Christophe SCHMIDT
(---.dsl.club-internet.fr)
Date: April 22, 2007 06:27PM
Hello,
I search about this question but found nothing : which guide spacing do you use for a blank dan craft 9ft 4wt sig V? Many thanks Jean-Christophe Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Billy Broderick
(---.hsd1.fl.comcast.net)
Date: April 22, 2007 09:08PM
Jean Guide spacing is done by true custom rod builders by following the blanks curves and not a standard cookie cutter spacing. Every blank is different and that includes blanks of the same brand and model. take the time to read some of the library of these sites on how to space and you will build a truly custom and quality rod that you can be proud of and will be a fishing tool and not a cookie. If you need help then by all means e-mail me your questions. Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Tony Dowson
(---.ok.shawcable.net)
Date: April 23, 2007 01:02AM
Email Dan for the spacings he uses.
It's always a good idea to use these kinds of spacings as a starting point and then do your own tests,but I think you will find Dan's spacings awfully close. Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Jean-Christophe SCHMIDT
(---.dsl.club-internet.fr)
Date: April 23, 2007 03:24AM
Sorry for my english... I'm french ;-)
I already built several blank : the last one was a IMX 9' 7wt... I use this spacing : 4; 9 ; 15 ; 22 ; 30 ; 38 1/2 ; 47 1/2 ; 56 3/4 ; 66 1/8 ; 76 But each blank is optimized for specific values : In a old post for a 9ft 5wt Dan Craft FT, I find this : 4.125; 9; 14.375; 20.375;27.125; 34.75; 43.625; 53.875; 65.5; 77.5 I think it's really close Are the guide spacing the same for SigV? Billy, I look into the library but found nothing about guide spacing for the blank Dan Craft Tony, I can't email Dan : Dan do not received some french email Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Erik Osterby
(---.hawaii.res.rr.com)
Date: April 23, 2007 09:16AM
Jean,
I sent you an email with Dan's suggestions for spacing. Erik Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: April 23, 2007 10:17AM
I imagine that Dan Craft's spacing will work great, but you can also read Tom Kirkman's article on Static Guide Placement to see how to customize the spacing; that Tom's method will allow you to do it for any blank you ever happen to build on. Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Tony Dowson
(---.ok.shawcable.net)
Date: April 23, 2007 11:57PM
The FT and SIG V are VERY different blanks so I would be quite surprised if the same spacings would be ideal for both.
The FT has a very stiff butt section,with a soft tip so it is a very fast action,while the medium fast action SIG V bends further down the blank.I haven't built a new 4pc SIG V yet,but have a couple of the previous 3pc 9ft 5wt SIG V's,as well as a 4pc 9ft 5wt FT and the spacings on each are very different from each other. If Erik sent you Dan's recommendation then I would start out with that and double check it with your own tests. Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Jean-Christophe SCHMIDT
(---.dsl.club-internet.fr)
Date: April 24, 2007 03:34AM
Eric, In the email you send me, there are many references for the 9' (but without differents models)
I find : 9’0" 4pc : 4.75", 9.75", 15", 21", 28.25", 36.5", 44.5", 53.5", 64", 76" 9’0" 4pc : 5, 10.25, 15.875, 21.5, 27.5, 34.25, 42.625, 53.375, 65.625, 78.875 9’0" 4pc : 4.25, 9, 14.125, 20, 26.5, 34, 42.625,53.25, 64, 76.5 Wich is the good for the sigV? For the moment I will test the last... ;-) NB : I hope that these data are not confidential and that we can diffuse them on this forum? Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Erik Osterby
(---.hawaii.res.rr.com)
Date: April 24, 2007 08:43AM
J.C.,
Sorry I can't help more. I just forwarded the info that I had received from Dan when I purchased my last blank. Although, I would start with this. As the rest seem to be for the Sig III models. 9’0†4pc 4.75â€, 9.75â€, 15â€, 21â€, 28.25â€, 36.5â€, 44.5â€, 53.5â€, 64â€, 76†Erik I sent you another email. Edited 1 time(s). Last edit at 04/24/2007 09:12AM by Erik Osterby. Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
gene hilton
(---.static.fasttrackcomm.net)
Date: April 24, 2007 09:59AM
I just built this and LOVE it! Here are the spacings I started with. Dan indicated that these were specifically for the 4 pc Sig V 9' 4 and 5 wt's.
SV9044 and SV9054: 4.75, 9.75, 15.125, 21, 27.5, 34.5, 43.825, 54.5, 66.25, 79.75 I ended up moving a couple guides less than half an inch and one just over an half an inch. Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
Jeff McDonald
(---.dsl.klmzmi.sbcglobal.net)
Date: May 19, 2007 10:42AM
Gene,
I'd like to bend your ear about your Dan Craft sig V. Can you send me an email? Re: 9ft 4wt Dan Craft sig V guide spacing
Posted by:
gene hilton
(206.123.216.---)
Date: May 24, 2007 02:05PM
done Sorry, only registered users may post in this forum.
|