SPONSORS
2024 ICRBE EXPO |
Fuji Quiklok Foregrip
Posted by:
Greg Marshall
(---.cpe.cableone.net)
Date: April 11, 2007 07:45PM
Does anyone know where I can find the preshaped EVA foregrip that will fit the Fuji Quiklok Foregrip? Should be 7/8 id to accept the Quiklok, bout ...oh, 3" long. I'm assuming the fore end is somewhat smaller than 7/8. AW informed me that Fuji is discontinuing the item and I have a customer insisiting on it on this repair job. If not, does anybody know how to make one? I've ordered some EVA disks ( 1.25 O.D X 0 I.D. X.562L)from AW but have never worked with gluing EVA disks together. Does it work the same as cork? I know this is available in cork but my customer wants it back just like it was. Re: Fuji Quiklok Foregrip
Posted by:
Ron Schneider
(---.mthmcmta01.mthoar.lr.dh.suddenlink)
Date: April 12, 2007 07:31AM
Hi Greg,
CUI makes both EVA and Cork for their special seats. We have them in stock, but they are about 1/4" shorter than the Fuji. If all else fails, maybe trim the open end of the Fuji Quicklock? If you like, give us a call 1888-946-2427 Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: Fuji Quiklok Foregrip
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: April 13, 2007 12:10AM
Check with Anglers Workshop, they had a bunch last I needed them in cork and eva. I may be able to come up with one if they don't have any. Sorry, only registered users may post in this forum.
|