SPONSORS
2024 ICRBE EXPO |
Hello, new member
Posted by:
Brian Folz
(---.dhcp.mrqt.mi.charter.com)
Date: January 07, 2007 11:37AM
Just checking in to say hi. I'm concocting some ideas to screw up some existing rods and start building some new ones to abuse up as well, and found this site. Great readership and wealth of information here. Thank you everybody for contributing. . .what a great resource. If I ever learn anything of value I'll try to contribute and stop lurking. Thanks again,
Brian Re: Hello, new member
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 07, 2007 11:43AM
Hi Brian,
Welcome aboard! Don't hesitate to post any questions that you might have. Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Hello, new member
Posted by:
James(Doc) Labanowski
(---.proxy.aol.com)
Date: January 07, 2007 01:21PM
Brian you need to know that by posting any difficulties you might be having often help us learn new things in trying to answer your questions. There are NO stupid questions. I constantly am amazed by how much I learn by trying to help others. Re: Hello, new member
Posted by:
Randy Search
(---.lsanca.fios.verizon.net)
Date: January 07, 2007 01:42PM
Then I've taught you alot Doc...LOL. Re: Hello, new member
Posted by:
Ralph D. Jones
(---.bhm.bellsouth.net)
Date: January 07, 2007 04:56PM
Brian, I've learned more on this site than I thought there was to learn. I still learn each and every time I come here. Mostly I learn how little I really know and how much more there is to learn about rod building. The more I learn the less I know. Ralph If at first you don't succeed, go fishing, then try, try again. Re: Hello, new member
Posted by:
Brian Folz
(---.dhcp.mrqt.mi.charter.com)
Date: January 07, 2007 07:56PM
Thanks y'all. . .I'll get busy then,
Brian Re: Hello, new member
Posted by:
paul blamire
(---.lnk.telstra.net)
Date: January 07, 2007 10:55PM
Welcome aboard Brian !!!!!
thats true there are builders/professionals from all over the world here that can answer questions on just about any topic so ask away and if you get stumped there will always be an answer out there for you Re: Hello, new member
Posted by:
Russ Pollack
(---.client.stsn.net)
Date: January 09, 2007 01:13AM
Welcome, Brian.
Come to the Show, if you can. You'll learn more in a few days than you will ever believe. But there's always someone here to help, and unlike me, a lot of them really know what they're doing. Uncle Russ Calico Creek Rods Sorry, only registered users may post in this forum.
|