SPONSORS
2024 ICRBE EXPO |
guide size and spacing for 6 ft 2/3 wt 2pc fly rod
Posted by:
James M. Dement
(---.proxy.aol.com)
Date: March 11, 2006 04:09PM
I need guide size and spacing for a 6 ft 2/3 wt 2 piece fly rod. any suggestions would be great. thank you.
James M. Dement Re: guide size and spacing for 6 ft 2/3 wt 2pc fly rod
Posted by:
John Dow
(---.245.167.250.Dial1.Stamford1.Level3.net)
Date: March 11, 2006 11:15PM
There are some generic charts on a few of the sponcor sites , Mud Hole , StCroix , and some others . The proper was is to follow the artical in the Library at the top of this page on the "Static Guide Placement Primer ". Get to there , and ask specifics after you have that done . Guide sizes will depend on knot size , which on a rod of that calibure shouldn't be that big . A# 8 or10 stripper , then SF wire (Recoils are my favorite of that rod) in # 1s & 2s . Hope this helps . John ,No E. Rod Builders, Got Fish ? Edited 1 time(s). Last edit at 03/11/2006 11:18PM by John Dow. Re: guide size and spacing for 6 ft 2/3 wt 2pc fly rod
Posted by:
James M. Dement
(---.proxy.aol.com)
Date: March 12, 2006 09:26AM
Thanks John, I got the same advice from Another member as well. Thank you guys for the help.
James M. Dement Sorry, only registered users may post in this forum.
|