I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Source for orthodontic rubber bands
Posted by: Pete Kornegay (---.client.mchsi.com)
Date: January 26, 2006 09:06PM

For those of you who use orthodontic rubber bands to hold guides in place, I recently dealt with Thompson Orthodontics in Prospect, KY with good results. Phone number is 1-800-251-3437 and their web site is www.thompsonorthodontics.com

I spoke to John Thompson about ordering 1/4 inch rubber bands- he said a sizeable part of their rubber band sales are to crafts people.

The only problem was the minimum order- 5,000 (50 bags of 100 each). That's a lot of rubber bands. Cost was $39.95 + $6.95 S/H.

Pete K.


Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: Edward D. Smith (---.ard.bellsouth.net)
Date: January 26, 2006 09:23PM

Get surgical tubing and cut you own with a single edge razor blade. Source of tubing: www.reefscuba.com/surgical_tubing.htm. They sell 10 ft lengths for $5.50 + S/H. I got some 1/16 and 1/8 from them. I had all kinds of 1/4 inch stuff prior to retiring.. A foot will last a long time.

Ed Smith

Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: Marvin Engel (---.kingtx.interconnect.net)
Date: January 26, 2006 10:05PM

Pete,
I use the small mini plastic ties available at any Wal-Mart. They are inexpensive and work very well. I will tighten them up close to the base of the guide foot and then slide it up halfway up the guide foot which makes it fit just a little tighter. I will make wraps right up to the tie then cut the tie off with a pair of small wire cutters. It holds the guide in place very well.
Capt. Marvin Engel
Big M's Fishing Charters

Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: Anonymous User (---.hsd1.nj.comcast.net)
Date: January 26, 2006 10:07PM

Called the Local Orthodontist's office and was told that the Rubber bands are in the outside mail box! Help yourself! There was two sizes 4 and 6 ? took both

Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: Steve Gardner (---.dyn.sprint-hsd.net)
Date: January 26, 2006 10:07PM

Bring some to show ,if it Dosen't create a confict of interest with Tom. Maybe get one of the venders to sell them for you.

Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: Galen Briese (134.129.79.---)
Date: January 27, 2006 09:51AM

Pete , go to the Reef Scuba Accessories web site, they have every size of latex tubing that is imaginable. They sell it in 3 ft pieces, and in 10 foot rolls. Very reasonable. It is the only place that carries the super small ID tubing that will fit guides to small diameter blanks. Phone Number is 1-800-633-4837. Web address is www.reefscuba.com/surgical_ tubing.htm, or just do a search for RSA, or just Reef Scuba Accesories.

Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: Stan Gregory (---.dyn.sprint-hsd.net)
Date: January 27, 2006 10:16AM

The surgical latex tubing from ReefScuba Accessories works great. As Galen mentioned, the latex tubing is available in a great range of sizes. I use very sharp scissors to cut the tubing into rings.

Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: David A. Fuller (---.region6.ang.af.mil)
Date: January 27, 2006 04:44PM

Tip No 1, Mudhole Tackle sells the tubing in two different sizes/diameters. Tip No 2, cut the tubing across about 1/8 inch thick.

God Bless America

Good Wrappin !
David A. Fuller,
Great Basin Fishing Rods
Full-Time RV'r Traveling- n- Fishing
www.mytripjournal.com/FullersBigAdventure

Options: ReplyQuote
Re: Source for orthodontic rubber bands
Posted by: Susan Saposnick (71.225.142.---)
Date: February 13, 2006 02:50PM

I sell and fix dolls and am in need of very small, orthodontic size rubber bands. Please tell me where to buy them. Thank you.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster