SPONSORS
2024 ICRBE EXPO |
Butt for Penn 450 SSG
Posted by:
bill boettcher
(---.an2.nyc41.da.uu.net)
Date: January 06, 2006 03:18PM
If any one has built a 7 FT spin rod with a Penn 450 SSG reel on it, what size butt guide did you use ?
With Titan single foot spin guides and 10 LB test line. Thanks Edited 1 time(s). Last edit at 01/07/2006 10:03AM by bill boettcher. Re: Butt for Penn 450 SSG
Posted by:
Bob Shaughnessy
(---.138.254.133.Dial1.Boston1.Level3.net)
Date: January 06, 2006 04:18PM
I have an older 7' st.croix. The reel which was an older 450ss(before they turned to all graphite) my butt guide was a 30 double foot guide. Re: Butt for Penn 450 SSG
Posted by:
james stavola
(---.dyn.optonline.net)
Date: January 08, 2006 01:06AM
yes, i agree #30 ihave single foot guides on 7' fenwick 846 with old 450ss,don't know if you're doing concept i tried but angle that on reel wouldn't line up right ,someone else had that problem with a penn ss,can't rember if on this site or elsewhere,maybe i'll try search ,good luck. Re: Butt for Penn 450 SSG
Posted by:
bill boettcher
(---.an2.nyc41.da.uu.net)
Date: January 08, 2006 08:12AM
Thanks guys
I don't have the reel and was wondering if I could get the size of the Face Plate of the reel. Going to use 10 LB line and I am thinking 25 single foot ? Looking at the reel again, Iam going to order a 30 also. Better to have too many Edited 1 time(s). Last edit at 01/08/2006 08:40AM by bill boettcher. Sorry, only registered users may post in this forum.
|