SPONSORS
2024 ICRBE EXPO |
Rodbuilding How-To Video online?
Posted by:
Lance Black
(---.224.140.67.ip.alltel.net)
Date: December 10, 2005 05:43PM
anyone know where you can download a How To video online?? Re: Rodbuilding How-To Video online?
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 10, 2005 06:30PM
Any of the rod building videos that would be of any help would be at least an hour long and are available for sale from Mudhole.com, as well as most other vendors. There are a lot of very good ones. If you go to Mudhole.com and look for Rodbuilding 101 along the top, their is a short finishing clip as well as a lot of articles.
Re: Rodbuilding How-To Video online?
Posted by:
Shawn Moore
(82.96.100.---)
Date: December 10, 2005 07:12PM
I think he's looking for "free" videos. I don't know of any personally but would highly recommend those that Mud Hole and others offer. They'll cost you a few bucks but are well worth what you'll get out of them. Don't let this site spoil you. Most rod building information isn't free once you get to a certain point. Re: Rodbuilding How-To Video online?
Posted by:
Al Johnson
(---.dyn.optonline.net)
Date: December 10, 2005 07:20PM
Online videos here.
They are show #3 and #4. Click on the movie project to open them or right click and save as [www.thefishingline.com] Re: Rodbuilding How-To Video online?
Posted by:
Lance Black
(---.224.140.67.ip.alltel.net)
Date: December 11, 2005 12:03AM
Thanks Al!!!
downloading them now! Re: Rodbuilding How-To Video online?
Posted by:
Fred Yarmolowicz
(---.brick101.nj.comcast.net)
Date: December 11, 2005 11:04AM
I watched part one,interesting to say the least.Its like watching home improvement shows that dont follow safety or common practices.The builder was using laquer thinner to clean the blank and his hands.He was addament about the grips being secured properly with epoxy distribution but on the seat was rather sloppy.I would have unwound the mesh tape to add epoxy to insure proper penatration.Also the inside of the seat was not prepped to a water break free surface or even scored with a reamer to add in adhesion!!
His epoxy measuring was good for a beginner to learn(not).He added both parts to a cup at the same time by eye.I know this is epoxy glue not finish but it will be easy to confuse a new builder. Cant wait to see part 2 ,part 1 was entertaining to say the least.Goes to show you get what you pay for.The text on the site says a 55 min version is available for sale that has a lot that was cut out that was important.Was this a infomertial for the video sales.If so stay away. (Tom hope the reference to the site selling the video was ok,if not please edit and accept my appoligies) Dont know what happened last night but the spelling is rreally bad today,Too much permagloss??? Freddwhy (Rapt-Ryte) Re: Rodbuilding How-To Video online?
Posted by:
Al Johnson
(---.dyn.optonline.net)
Date: December 11, 2005 12:30PM
Fred Yarmolowicz Wrote:
------------------------------------------------------- > I watched part one,interesting to say the > least.Its like watching home improvement shows > that dont follow safety or common practices.The > builder was using laquer thinner to clean the > blank and his hands.He was addament about the > grips being secured properly with epoxy > distribution but on the seat was rather sloppy.I > would have unwound the mesh tape to add epoxy to > insure proper penatration.Also the inside of the > seat was not prepped to a water break free surface > or even scored with a reamer to add in adhesion!! > > His epoxy measuring was good for a beginner to > learn(not).He added both parts to a cup at the > same time by eye.I know this is epoxy glue not > finish but it will be easy to confuse a new > builder. > Cant wait to see part 2 ,part 1 was > entertaining to say the least.Goes to show you get > what you pay for.The text on the site says a 55 > min version is available for sale that has a lot > that was cut out that was important.Was this a > infomertial for the video sales.If so stay away. > > (Tom hope the reference to the site selling the > video was ok,if not please edit and accept my > appoligies) > > Dont know what happened last night but the > spelling is rreally bad today,Too much > permagloss??? > > Freddwhy(Rapt-Ryte) Yea, I just finished watching all of it. The guy seems kind of lazy. Only one I have seen for free online. Gives you and idea about rodbuilding but it would still be smart to get a book. Sorry, only registered users may post in this forum.
|