SPONSORS
2024 ICRBE EXPO |
Question for Tom and the Board on EVA Grips
Posted by:
Rich Matranga
(---.dsl.scrm01.pacbell.net)
Date: December 03, 2005 05:35AM
Tom, I was looking at the photo you posted on April 4, 2005 of EVA grips. Is there instructions I could get on how to produce EVA grips of this class? There's got to be a few tricks on making such clean cuts and bonding the various shapes together. I'd just love to learn how to make grips like the ones in your photo.
Thank you very much! Rich Matranga Folsom, California Re: Question for Tom and the Board on EVA Grips
Posted by:
Donald Newenhouse
(---.235.144.230.Dial1.Orlando1.Level3.net)
Date: December 03, 2005 08:21AM Hi Rich-- If you want to know how to make custom eva grips just go to the sponsor list to left side of the page and scroll down to Rod Maker Magizine and order a back issue of Vol.7 Issue#6. There is a full artical on creating eva grips by Tom Kirkman . Great artical,It will tell you how to cut eva,how to glue and shape eva and it also has some tips and tricks. Some great stuff on what can be done with eva grips.Hope this is of some help with you question. Good Luck <<<<<DON>>>>> Re: Question for Tom and the Board on EVA Grips
Posted by:
Anonymous User
(Moderator)
Date: December 03, 2005 08:58AM
Yes, there are instructions for doing exactly what you ask - in RodMaker Magazine Volume 7 #3.
Which brings up a conversation I had with someone just yesterday - as helpful as the internet is, the internet and these related forums do not create information. They only recycle information that has been created elsewhere. This is the great internet myth - that you can get the same information from the internet that you can from books, magazines, publications, etc. You can't - you can only get after the fact, generalized recycled information that saw the light of day elsewhere. Very little in the way of anything has ever been created or seen the first light of day on the internet or world wide web. it is not a medium for the creation of information, but simply for the dispensing of information created elsewhere, and usually in much more condensed form. Not to put off your question, just to point out that most anything you'd ever want to do with regards to rod building can be found in RodMaker or one of the good rod building books done over the years. Of course you can pick up tidbits of the same information, trickled down, on the internet forums, but for specific techniques the publications beat the internet handily. ................. Re: Question for Tom and the Board on EVA Grips
Posted by:
Dave Gilberg
(---.pghk.east.verizon.net)
Date: December 03, 2005 03:19PM
Just to clarify.... The issue of RodMaker covering EVA Grips is Volume 7 Issue#3. Re: Question for Tom and the Board on EVA Grips
Posted by:
Rich Matranga
(---.dsl.scrm01.pacbell.net)
Date: December 03, 2005 03:35PM
Thanks guys. I figured there would be printed information on this subject. I've already ordered the back issue (vol. 7 issue 3). Thanks again for the quick responses.
Rich Re: Question for Tom and the Board on EVA Grips
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: December 03, 2005 11:32PM
RIch - in addition to that magazine, you might wanna try the Search feature. Sorry, only registered users may post in this forum.
|