I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Heated Rod Dryer Box
Posted by: Don Jones (65.213.88.---)
Date: July 11, 2005 11:49AM

Does anyone have plans or a picture of a heated rod dryer box that they've built? I did a search and it looks like there use to be pictures on the old photos board but I didn't see any on the new. Also, does anyone sell these new or is this pretty much a home project only?

Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Billy Vivona (4.43.114.---)
Date: July 11, 2005 12:25PM

I think it's a Home Project thing. HEre is the old board, if you look under Billy 40 I have a few pix posted from my box which I built. And I am probably teh absolute worst handyman there is, and I was able to do it. So can you.

[www.fishingphotos.net]

Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Peter Houston (---.prem.tmns.net.au)
Date: July 11, 2005 07:51PM

Don,

I have sent you an email with photos attached of my heated drying box, home built.

Regards,

Peter.


Regards,

Peter.
Rods On The Fly,
Newcastle, Australia.

Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Derek McMaster (---.ca-sanfranc0.sa.earthlink.net)
Date: July 11, 2005 11:59PM

PLEASE POST PICTURES......That is the one area where the new photo area is lacking. There are not near enough photos of rod building equipment. I have some great designs, but no money to build them personally. I think everyone would benefit from more photos in this section, ne ideas, new methods, etc.

Derek


Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Peter Houston (---.prem.tmns.net.au)
Date: July 12, 2005 12:44AM

Derek,

As Billy has done, i too had posted photos of my drying box on the old board, under rodsonthefly. Didnt see the need to post them twice.

[www.fishingphotos.net]


Regards,

Peter.

Regards,

Peter.
Rods On The Fly,
Newcastle, Australia.

Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Duane Richards (---.rn.hr.cox.net)
Date: July 12, 2005 05:26PM

If someone would include me in that email, I'd sure apreciate it please. I looked in the links and didn't find anything, but I'm sure that's me :)


drcrwr@yahoo.com

DR

Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Mike Barkley (---.nap.wideopenwest.com)
Date: July 12, 2005 06:24PM

Very few people that are reasonably new to this board would have any idea of where the old board is. It would really help if guys would take a few minutes and reload their pix to the new board so everyone could benefit from them!!

Mike

Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Jim Upton (---.lsanca.dsl-w.verizon.net)
Date: July 13, 2005 07:55PM

OK Mike I did it...

Jim

Options: ReplyQuote
Re: Heated Rod Dryer Box
Posted by: Mike Barkley (---.nap.wideopenwest.com)
Date: July 13, 2005 11:31PM

Jim,

Everybody should get to enjoy seeing your remarkable work!!!!!!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster