SPONSORS
2024 ICRBE EXPO |
Heated Rod Dryer Box
Posted by:
Don Jones
(65.213.88.---)
Date: July 11, 2005 11:49AM
Does anyone have plans or a picture of a heated rod dryer box that they've built? I did a search and it looks like there use to be pictures on the old photos board but I didn't see any on the new. Also, does anyone sell these new or is this pretty much a home project only?
Re: Heated Rod Dryer Box
Posted by:
Billy Vivona
(4.43.114.---)
Date: July 11, 2005 12:25PM
I think it's a Home Project thing. HEre is the old board, if you look under Billy 40 I have a few pix posted from my box which I built. And I am probably teh absolute worst handyman there is, and I was able to do it. So can you.
[www.fishingphotos.net] Re: Heated Rod Dryer Box
Posted by:
Peter Houston
(---.prem.tmns.net.au)
Date: July 11, 2005 07:51PM
Don,
I have sent you an email with photos attached of my heated drying box, home built. Regards, Peter. Regards, Peter. Rods On The Fly, Newcastle, Australia. Re: Heated Rod Dryer Box
Posted by:
Derek McMaster
(---.ca-sanfranc0.sa.earthlink.net)
Date: July 11, 2005 11:59PM
PLEASE POST PICTURES......That is the one area where the new photo area is lacking. There are not near enough photos of rod building equipment. I have some great designs, but no money to build them personally. I think everyone would benefit from more photos in this section, ne ideas, new methods, etc.
Derek Re: Heated Rod Dryer Box
Posted by:
Peter Houston
(---.prem.tmns.net.au)
Date: July 12, 2005 12:44AM
Derek,
As Billy has done, i too had posted photos of my drying box on the old board, under rodsonthefly. Didnt see the need to post them twice. [www.fishingphotos.net] Regards, Peter. Regards, Peter. Rods On The Fly, Newcastle, Australia. Re: Heated Rod Dryer Box
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: July 12, 2005 05:26PM
If someone would include me in that email, I'd sure apreciate it please. I looked in the links and didn't find anything, but I'm sure that's me :)
drcrwr@yahoo.com DR Re: Heated Rod Dryer Box
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: July 12, 2005 06:24PM
Very few people that are reasonably new to this board would have any idea of where the old board is. It would really help if guys would take a few minutes and reload their pix to the new board so everyone could benefit from them!!
Mike Re: Heated Rod Dryer Box
Posted by:
Jim Upton
(---.lsanca.dsl-w.verizon.net)
Date: July 13, 2005 07:55PM
OK Mike I did it...
Jim Re: Heated Rod Dryer Box
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: July 13, 2005 11:31PM
Jim,
Everybody should get to enjoy seeing your remarkable work!!!!!! Sorry, only registered users may post in this forum.
|