SPONSORS
2024 ICRBE EXPO |
New Pre-Made Wood Handles
Posted by:
Mud Hole Custom Tackle
(---.se.biz.rr.com)
Date: May 04, 2005 02:33PM
Mud Hole is now happy to offer pre-made custom wood handles to custom rod builders. Don't know how to turn wood, no problem you can now order beautiful wood handles for your next custom rod at a price that is just a little higher than a cork handle. Follow the URL below to read more about it.
[shop.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: New Pre-Made Wood Handles
Posted by:
Don Davis
(---.ssa.gov)
Date: May 04, 2005 04:03PM
Excellent! Can I offer a suggestion? Forget the two little groves at the end of the half-wells grips. Don't need 'em, don't want 'em. Re: New Pre-Made Wood Handles
Posted by:
Gerry Rhoades
(---.unifield.com)
Date: May 04, 2005 06:48PM
I would second Don's suggestion. Re: New Pre-Made Wood Handles
Posted by:
Steven Libby
(---.hsd1.ma.comcast.net)
Date: May 04, 2005 07:32PM
Excellent! Obviously someone has been paying attention...Great start. Thanks Mud Hole! Re: New Pre-Made Wood Handles
Posted by:
Steven Libby
(---.hsd1.ma.comcast.net)
Date: May 04, 2005 07:41PM
ps - is there a patent on these handles (tch)? Re: New Pre-Made Wood Handles
Posted by:
Mud Hole Custom Tackle
(---.205.202.68.cfl.res.rr.com)
Date: May 04, 2005 08:45PM
Don, no problem if you do not want the two little groves just put a note in the comments section of the order form when you check out and we will not put them in. FYI - the groves are cut in the the wood and then the wood is coated with a clear coat that basically fills in the grooves so you do not actually feel them, you just see them below the surface.
We would add we just fished one of the Cobra handles shown on the bottom of that link. These handles are very comfortable to fish and we could see them being very useful for the right applications, check them out at: [shop.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: New Pre-Made Wood Handles
Posted by:
Mick McComesky
(---.245.16.56.Dial1.StLouis1.Level3.net)
Date: May 04, 2005 10:25PM
Outstanding!
Is it possible to get these grips unfinished as well? Re: New Pre-Made Wood Handles
Posted by:
bill boettcher
(---.250.153.250.Dial1.Weehawken1.Level3.net)
Date: May 05, 2005 10:08AM
Good question Mick
I have found that from coating wood and cork with a nice flat slick coat of clear makes them look nice - but is not nice in the hand. Slippery. Now I only put a very thin coat of clear on. Not as shinny but has a better grip in the hand. Re: New Pre-Made Wood Handles
Posted by:
Mud Hole Custom Tackle
(---.205.202.68.cfl.res.rr.com)
Date: May 05, 2005 12:01PM
Mick - Yes we can make them unfinished. Again just put that request in the comments area when you check out. I also note you can pick different ID's and wood type combinations from the drop down when you check out. Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: New Pre-Made Wood Handles
Posted by:
Greg Mitchell
(---.mercy.net)
Date: May 07, 2005 11:22AM
Is is possible to get them inletted for the typical uplocking fly reelseat?
Thanks, Greg Sorry, only registered users may post in this forum.
|