SPONSORS
2024 ICRBE EXPO |
How's it gonna look?
Posted by:
Al McClure
(---.vf.shawcable.net)
Date: March 31, 2005 09:45PM
I am currently wraping a dark blue Batson blank with royal blue thread and scarlet trim. I don't intend to use colour preserver. Can someone give me an idea of how the wraps are going to look after the epoxy goes on.
Re: How's it gonna look?
Posted by:
Ricky Wilson
(---.proxy.aol.com)
Date: March 31, 2005 09:50PM
They will be nearly transparent with no real hue of the original colors. Re: How's it gonna look?
Posted by:
Dave Gilberg
(---.pghk.east.verizon.net)
Date: March 31, 2005 10:40PM
Run a test. I wrap without CP and the thgreads darken and become translucent but they definitely retain colors. Re: How's it gonna look?
Posted by:
bill boettcher
(---.250.201.25.Dial1.Weehawken1.Level3.net)
Date: April 01, 2005 10:05AM
Next time before you put the handle on any blank, do some test wraps on the butt section just to see what it will look like
If you have not done a butt wrap, you can do it there? Just be carefull when you take it off. It can be repaired easy, with a base wrap if need be Edited 1 time(s). Last edit at 04/01/2005 10:07AM by bill boettcher. Re: How's it gonna look?
Posted by:
Al McClure
(---.vf.shawcable.net)
Date: April 01, 2005 10:34AM
Thanks for all the help guys. This is one terrific forum. Sorry, only registered users may post in this forum.
|